How to Choose 2-Inch Faux Wood Blinds for Your Windows? | Depth, Width, Lift Decided

Choosing 2-inch faux wood blinds comes down to three checks: inside-mount depth, a three-point measurement, and the size range your lift style allows.

A window that looks perfectly sized for faux wood blinds can still reject them — the headrail needs somewhere to sit, and the blind’s width limits change depending on whether you pick cordless, wand tilt, or motorized. Get the depth wrong and the blind hangs in front of the trim instead of inside it. Get the width wrong and it won’t fit the opening at all.

The upside is that faux wood earns its popularity: 2-inch slats handle both humidity and heat, and they leave a wider view than narrower slats, according to Blinds.com’s 2-inch faux wood blinds product page. Here is the order that works — measure, then match, then install.

Measure Twice, Round Down Once

Measure the window in three places — top, middle, and bottom for width; left, center, and right for height — and let the smallest number win.

For an inside mount, use the narrowest width you find. If your tape gives you 1/16″ or 1/32″ increments, round down to the nearest 1/8″. For an outside mount, flip the logic: take the largest width and height, then add at least 4 inches for coverage. Bali’s measuring guide goes further, calling for 1½” of overlap on each side — 3″ total — for the best light control and privacy.

Skipping the three-point check is the most common mistake, because almost no window opening is perfectly square. A single measurement in the middle can read a quarter-inch wider than the corners, and that is enough to make a cordless blind bind against the frame.

Check Inside-Mount Depth Before Anything Else

Inside-mount depth decides whether the blind tucks into the window frame or sticks out past it — and every model has two numbers that matter.

The minimum depth is what the headrail needs to mount inside the opening at all. The fully recessed depth is what it takes to hide the headrail completely behind the trim. Current product pages list a real spread:

  • Bali Essentials 2 Inch Faux Wood Blinds: 1 1/4″ minimum, 3″ fully recessed without a valance, 4 1/2″ with a decorative valance.
  • Veneta Classic 2 Inch Faux Wood Blinds: 1 1/2″ minimum, 3 7/8″ fully recessed.
  • SouthSeas 2 Inch Faux Wood Blinds: 1 5/8″ minimum, 3 3/4″ fully recessed.
  • Blinds.com Cordless 2 Inch Faux Wood Blinds: 1 5/8″ minimum, 2 7/8″ fully recessed.

If the opening is shallower than the minimum, outside mounting is the fallback — and that mount has its own surface requirement, typically 1 1/4″ to 2″ of flat space on each side of the window for the brackets.

Match the Lift Style to Its Size Limits

Your lift choice changes the maximum width and height you can order, so pick the mechanism before you fall in love with a size.

Cordless is the common default because it removes dangling cords from reach. Veneta Classic cordless runs from 18″ up to 72″ wide and 24″ to 84″ tall. Trademark 2 Inch Faux Wood Blinds cover 18 1/2″ to 72″ wide on a single headrail, stretching to 96″ when two or three blinds share one headrail, with heights of 24″ to 72″. Bali Essentials goes 16 1/2″ minimum for inside mount and 16″ for outside mount, up to 78″ wide and 78″ tall. Blinds.com’s cordless line starts at 20″ wide, tops out at 96″ wide and 96″ tall, and caps at 48 square feet.

Motorized options carry their own envelope — SouthSeas DualMotion runs 30″ to 72″ wide and 24″ to 72″ tall. No-lift styles stretch further in height, up to 120″ on some SouthSeas models.

Two installation details are near-universal: wand tilt comes standard on most 2-inch faux wood blinds, usually on the left side, and inside-mount widths are deducted by roughly 1/2″ by the manufacturer so the blind clears the frame. Expect a headrail around 2 1/4″ wide and 2″ tall.

Model Inside-Mount Depth Width & Height Range
Bali Essentials 2 Inch Faux Wood Blinds 1 1/4″ min, 3″–4 1/2″ recessed 16 1/2″–78″ wide, 24″–78″ tall
Veneta Classic 2 Inch Faux Wood Blinds 1 1/2″ min, 3 7/8″ recessed 18″–72″ wide, 24″–84″ tall
SouthSeas 2 Inch Faux Wood Blinds 1 5/8″ min, 3 3/4″ recessed 20″–96″ wide, 12″–84″ tall
Blinds.com Cordless 2 Inch Faux Wood Blinds 1 5/8″ min, 2 7/8″ recessed 20″–96″ wide, 24″–96″ tall
Trademark 2 Inch Faux Wood Blinds 1/2″ inside-mount deduction 18 1/2″–96″ wide, 24″–72″ tall
Classic 2 Inch Faux Wood Blinds Cordless, single headrail 12″–120″ wide, 12″–72″ tall
SouthSeas DualMotion (motorized) Motorized headrail 30″–72″ wide, 24″–72″ tall

Once depth, width, and lift all line up, the buying decision gets easy. If you already know you want a bright, uniform look across several rooms, this roundup of tested 2 inch white faux wood blinds covers models that photograph well and hold their finish.

Order With Safety and Fit in Mind

Cordless isn’t just a style preference — it removes a real hazard for households with kids or pets, and it is the reason most 2-inch faux wood blinds now ship that way by default.

The recall is Canadian, but the risk applies to any corded window covering with accessible loops. If you have older corded blinds anywhere in the house, check the cord length and swap them for cordless, wand tilt, or motorized when you can.

FAQs

What happens if my window is shallower than the minimum inside-mount depth?

You switch to an outside mount. Most brackets need 1 1/4″ to 2″ of flat surface on each side of the opening, so confirm that space exists before ordering. Outside mounting also means adding at least 4 inches to your measured width and height for proper coverage.

Do I lose window width when I order cordless?

Sometimes. Cordless size limits vary by model — some cap at 72″ wide, others reach 96″ — so check the specific product page. Wider windows often need two blinds sharing one headrail, which manufacturers build for openings up to 96″ or beyond.

Should I measure to the window frame or the glass?

Measure the opening itself — the full interior width and height of the frame — for an inside mount. Take readings at three points in each direction and use the smallest. For outside mounting, measure the same opening but use the largest numbers and add your overlap allowance.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.

Mo Maruf

Mo Maruf

Founder

I am a dedicated home cook and appliance enthusiast. I spend hours in my kitchen testing real-world storage methods, reheating techniques, and kitchen gear performance. My goal is to provide you with safe, tested advice to help you run a more efficient kitchen.