Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
If your wall-mounted TV bulges off the drywall because a plug is jammed behind it, the fix is a recessed box — an outlet that hides inside the wall cavity instead of sitting on the surface. Buy the Arlington DVFR2W-1 if you want the strongest, deepest option for a real stud-mounted install, or the Celendor 2-in-1 2-outlet kit if you want one box to handle both power and your HDMI and Ethernet cables. Everything below is sorted into those two jobs: boxes you wire into the stud, and kits that hide the cords without new wiring.
I’m Mohammad Maruf — the founder and writer behind KitchPrep. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
The trick most buyers miss is depth: a recessed box sits flush only if the wall cavity behind the cutout is deep enough, and measuring first saves a patched wall and a second order. This guide keeps that in view while you sort the behind tv electrical outlet options worth your time.
Our Picks at a Glance
How To Choose The Best Behind TV Electrical Outlet
A recessed outlet box is the part that lets you push a wall-mounted TV flat against the drywall. A standard outlet sits on the surface and throws a plug’s body out about an inch, which is exactly the gap you see in photos where a TV floats off the wall. A recessed box solves that by sitting inside the wall cavity so the plug body disappears behind the faceplate. Two things decide which box works for you: how it gets power, and how much room your wall gives it.
Choose your power route first — stud-wired box or cord-extender kit
There are two genuinely different products in this category, and mixing them up is the most common mistake. A bare recessed box, like the Arlington DVFR2W-1, is an empty cavity you pull dedicated Romex wiring into and mount to a wall stud — an electrician or an experienced DIYer’s job. A cord-extender kit, like the Celendor or Elecpow sets, plugs into an outlet you already have, runs a long cord up through the wall, and ends in a new recessed outlet up at TV level. If you have no outlet behind the TV and no appetite for running new wire, the kit is your path. Both sit flush; only one rewires your wall.
Measure wall cavity depth before you buy anything
Depth is where this category bites. A recessed box eats into the space behind the drywall, and if the back of your cavity is blocked by insulation, a fire-block, or the opposite side of an interior wall, the box won’t seat. Drywall is typically ½ inch — the Arlington box includes positioning tabs for 1/2 inch wall thickness specifically to set it flush against the stud — and the Celendor kit asks you to confirm a cavity depth of 3.74 inches or more. Measure the cavity depth, not the wall surface, and you avoid the number-one reason these get returned.
Match gang size and ports to your cable count
Gang size just means how many wiring devices the box front holds: a 1-gang box takes one duplex outlet or one keystone plate, and a 2-gang box has room for two. If you need to hide an HDMI run plus Ethernet alongside power, a 2-gang box — or a single box with a dedicated brush port for low-voltage cables — saves you from cutting a second hole. A brush port is an opening with bristles that lets a connector pass through but keeps the cable from dropping back into the wall.
Quick Comparison
| Model | Best For | Gang Size | Power Source | Mount Style | Amazon |
|---|---|---|---|---|---|
| Arlington DVFR2W-1★ Best Overall | Cleanest wired install for a thin TV | 2-Gang | Wired (Romex) | Stud mount | Amazon |
| YasAo DVFR1W-1Best Value | Single-outlet retrofit on a budget | Single gang | Wired (Romex) | Stud or drywall | Amazon |
| iMBAPrice TVBU505-1Best for AV Routing | Power plus AV routing in one box | 2-Gang | Wired (Romex) | Stud or drywall | Amazon |
| ZEXMTE Wall Cable Concealer Kit | No-wiring install with a cutting template | Single gang + brush | Plug-in cord | Mounting clips | Amazon |
| Celendor 2 AC Socket Kit | Power and HDMI in one recessed box | 2-outlet + brush port | Plug-in cord | Screw-in | Amazon |
| Elecpow In-Wall Cable Kit | Family install on a tight budget | Duplex + brush | Plug-in cord | Screw-in | Amazon |
| Naerza Recessed TV Outlet Kit | One-session install with templates | Dual socket + brush | Plug-in cord | Wing clips | Amazon |
| Dremica TVBU505-1 2-Pack | Two rooms, new build or retrofit | 2-Gang | Wired (sold without outlet) | Stud or wing screws | Amazon |
| Celendor 9.8FT Cord Kit | Cleanest all-in kit with a cord long enough for cabinets | 2 AC outlets + brush | Plug-in 9.8FT cord | Screw-in | Amazon |
In‑Depth Reviews
1. Arlington DVFR2W-1 Recessed Electrical Outlet Mounting Box with Paintable Wall Plate, 2-Gang, White
Our pick — over 4.5★ from 350+ verified ratings; the strongest balance of quality and price.
The recessed box that turns a bulky plug into roughly half an inch of clearance.
For anyone doing a proper wired install behind a wall-mounted TV, this is the safest place to start. It’s a true recessed box: the plugs drop into the cavity instead of sticking out past the faceplate, so furniture and a flat TV can sit closer to the wall. The plate is textured and paintable, which matters when your wall isn’t a perfect white. Screw-in installation and a plastic construction that’s thicker and stiffer than a standard blue box round out the build.
What wins people over is the quality of the thing — it’s the most-praised trait by a wide margin, and installation ranks right behind it. The diagonal screw holes let you drive it straight into a stud, and buyers report the recessed box enables power, TV, and gigabit ethernet to sit flush behind furniture with about 1/2″ of clearance. It has room for power on one side and low-voltage on the other, and one long-time installer put it plainly: “Anytime I do a TV install, I use these.” The deep cavity even swallows a bulky power adapter that a standard box would reject.
Positioning tabs are set for 1/2-inch wall thickness, so the box lands flush against the stud instead of sinking or standing proud. It fits Decora and keystone inserts — keystone being the snap-in jacks that hold an HDMI or Ethernet port — up to six ports, so a single cutout can serve power plus data. It weighs 13.44 ounces, which feels solid in hand without making overhead mounting awkward.
Where it earns its keep
- Truly recessed, so plugs sit inside the wall and the TV sits flush
- Divider keeps high-voltage and low-voltage wiring separated in one box
- Deep cavity takes a power adapter a shallow box can’t
- Textured plate takes paint to match your wall
What to plan around
- It’s very deep — measure the cavity so it doesn’t meet the far side of the wall
- Cutout is larger than a standard double-gang box, so it’s best on a fresh install or planned retrofit
- The faceplate is slightly brittle if you over-tighten screws
Reach for this if: you’re wiring a recessed receptacle into a stud and want the deepest, stiffest box for a thin wall-mounted TV.
Think twice if: your cavity is shallow or shared with the opposite wall — the depth that makes it great is the same depth you have to clear.
2. YasAo DVFR1W-1 Recessed Electrical/Outlet Box Wall Plate Kit, Single Gang, White
The budget one-outlet box that still tucks a GFCI behind the TV.
If you only need a single outlet hidden and you’re working within an existing stud bay, this kit does it for less. It’s a recessed box that fully encloses the outlet, which keeps the internals away from moisture and the kind of dust and nibbling that rodents leave. The design accepts standard outlets, GFCI, USB, HDMI, and Ethernet jacks, so it’s flexible on the front side.
The finish and build land well for the price: buyers call it sturdy, tidy, and well-packaged, and it works behind a TV without the plug poking out past the wall. Installation is documented for two situations — #7 long screws into a stud, or #2 flag screws into drywall if there’s no convenient stud — and you can do both at once. It comes with a standard duplex cover plate and a rectangular cover plate, plus a cable connector and screws.
The fit is the one thing to get right. Owners mention it isn’t a standard single-gang box — it’s as big as a double-gang, requiring a hole 2x larger than you’d expect, so it suits a planned installation rather than a swap into an existing hole. The included directions are thin, and the hardware is where corners show: a couple of the supplied screws don’t always bite, and the screw paint wears off fast.
Space where it counts: yanks plugs and adapters back into the wall so tablets, clocks, and wall-mounted screens can sit close.
The honest nuance: that generous cavity means a custom opening — trace and cut deliberately, because this isn’t a drop-in for a standard single-gang hole.
Best for: a first recessed install where you’re cutting fresh and want single-outlet simplicity.
Look elsewhere if: you’re trying to reuse an existing small cutout — this box wants a bigger one.
3. iMBAPrice TVBU505-1 Recessed TV Outlet Box, White, 2-Gang
A dual-gang cavity built for power on one side and your AV cables on the other.
Owners who want a single cutout to serve both the outlet and their signal cables get the most from this box. It’s designed to take electrical outlets alongside HDMI, Ethernet, coaxial, speaker wire, and AV routing, so the television setup looks built-in rather than plugged-in. It falls into the same non-metallic plastic family as the Arlington and the Dremica, which keeps the install light and the price modest. It comes with #8 x 3″ long screws — long enough to reach through over an inch of material, which is why it also ends up in cabinets for under-cabinet lighting.
The install here is genuinely forgiving. You can grab the drywall with the mounting tabs or screw the box to a stud, so you aren’t locked into one stud position — an owner who fitted several across two homes praised that flexibility directly. Recessing the plug area lets straight TV plugs sit below the wall line, so a close wall mount doesn’t jam against them. People also value it for cable organizing, since the second cavity keeps your HDMI and Ethernet runs tidy and ready to swap.
Here’s the catch worth knowing before you cut: customers note it’s advertised as two gang but won’t accept two standard outlet receptacles — the screw holes aren’t centered in the housing, so a standard receptacle won’t fit cleanly and squeezing them in stops the trim plate seating right. Treat the second bay as low-voltage cable routing rather than a second outlet, and the box makes sense.
The wins
- One cutout covers power plus HDMI, Ethernet, coax, and speaker wire
- Mounts to drywall or a stud, so positioning is flexible
- Long screws reach through cabinets and thick material
- Recessed plug area lets a close TV mount sit flat
The trade-off
- Won’t hold two standard outlet receptacles despite the 2-gang label
- Requires comfort with basic wiring and electrical work
- Better suited to a planned wall cutout than a tight retrofit
Choose this if: you want one recessed cavity for power and all your signal cables.
Not your box if: you’re expecting two working outlets in one faceplate — plan on one receptacle plus a low-voltage run.
4. ZEXMTE Wall Cable Concealer Kit, in Wall Cable Management Kit for TV, White
The no-new-wiring route: a recessed outlet that plugs in and hides the mess.
This kit exists for the buyer who has an outlet somewhere near the TV but nothing behind it. Instead of running Romex, you cut two holes, feed the cord through, and end up with a recessed outlet up top and a clean exit below. It comes with a cutting template and instruction manual so the two cutouts match the parts, and it mounts with included clips — no extra brackets needed.
What works is that it does exactly the job: the brush wall plate holds low-voltage cable so it doesn’t drop back into the hole, the recessed angled outlet fits a TV cord, and the 20 amp/125 volt duplex receptacle handles your power side. The frame also sits flush enough to pull screens and consoles closer to the wall. The white goes with just about any room, which is why it turns up in offices and conference rooms as often as living rooms.
Installation is the mixed part, and it’s honest to say so — plenty find it easy with the included template, while others run into a fiddly wall. The instructions skip a step that matters: you need to attach the outlet box to the frame before you mount it in the wall, and the mounting wings need aligning as you tighten. One buyer found the frame fits perfectly but the components feel light for the job. Measuring your cavity — 3.74 inches of depth — before cutting keeps the install from stalling.
Value read: a self-contained kit that handles both the power and the cable pass-through in one box, template and clips included.
Plan for the wall: the frame needs a hole roughly its own size to sit right — expect a larger opening than a surface plate, not a swap-in.
Worth grabbing if: you have an outlet nearby and want a clean cord-extender hide without an electrician.
Skip the hassle if: you can’t cut a sizable opening — brick or cramped cavities make this careful work.
5. Celendor Recessed TV Outlet for in Wall Management Kit Set 2 AC Socket, White
Two outlets on the left, a brush port on the right — one box, two jobs.
This is the split-design kit: a pair of US-standard AC outlets on one side, and a brush port on the other that takes HDMI, Ethernet, coaxial, and audio connectors of any size. One box replacing two separate cutouts means less cutting and less clutter. The brush opening is the standout feature here — because it isn’t a fixed HDMI panel, it accepts whatever connector you have and lets you swap cables later when your setup changes.
The people buying it for a wall-mount job tend to fix the mess without an electrician. The purpose-built extension cord lets you place the outlet where you actually need it, and the power outlet plus brush port address both power and cable-routing in one go. Instructions come as cards with templates, which keeps the cutting straightforward for a confident DIYer. It’s also worth knowing it works beyond the TV wall — projectors, monitors, desks, and conference gear all benefit from a hidden power-and-data point.
There’s a clear boundary to this kit, though. It’s a cord-extender kit, so it feeds from an existing outlet via its cord rather than adding a new circuit. And it’s most useful when you don’t already have an outlet at mount level; if one is already there, you may not need the kit at all. If there’s already a power point where the TV hangs, that’s the signal to reconsider.
Why it works
- Splits power and cable routing in one recessed box
- Brush port takes any connector size, so it ages well
- Instruction cards double as cutting templates
- Beginner-friendly enough for a patient DIYer
Where it’s limited
- Feeds from an existing outlet rather than a new circuit
- Overkill if you already have a recessed outlet at TV level
- Still needs two wall cutouts to run the cord and cable
Reach for this if: you want power and every low-voltage cable hidden through one nicely split box.
Look elsewhere if: you need new wiring run into the wall — this kit extends, it doesn’t rewire.
6. Elecpow in Wall Cable Management Kit, Hide TV Power Cables & Low Voltage Wires
The price-first hide kit: gets the wires gone without breaking a budget.
When the goal is simply to stop the cable spaghetti behind a TV, this kit delivers it cheaply. It pairs a 15 amp/125 volt duplex receptacle with a brush wall plate and a cutting template, so you get both a hidden outlet and a low-voltage pass-through in one package. The white finish is meant to blend into any room, and the cord-and-box setup lets you choose where the outlet lands.
Owners speak to it as a value pick: it does its job adequately and it’s clear you’re trading a little refinement for a lower cost. The build is on the flimsy side — the wing tabs on the outlet can snap if you’re not careful, and tightening the locking tabs to the wall takes some patience, sometimes a drill and pliers. The brush seal does its job of hiding the run, but it doesn’t grip or retain cables firmly, so route them with a little slack.
Two practical notes for your wall. Because it mounts with wing tabs that pull flush against 1/2-inch drywall, keep your cut opening accordingly — misjudge it and the fit suffers. And the 15 amp/125 volt rating is a match for a TV’s power load, but with a large TV and adapters you’ll want to route cables first and seat them before you close the box.
The budget win: a duplex outlet plus a brush pass-through plus template at the value end of the category — enough to hide a TV’s cords.
The honest caveat: the tabs and the brush are the weak points — measure, tighten gently, and don’t expect top-tier hardware at this tier.
Good fit for: a family TV setup where hidden wires matter more than premium hardware.
Not for you if: a heavy TV plus multiple adapters is the load — leave room around the outlet.
7. Naerza Recessed TV Outlet for in Wall Management Kit Set Box, Two-Hole Socket
Detailed diagrams and wing clips make this one the most approachable single-session install.
This kit is built around a clear install: it ships with detailed step-by-step diagrams and uses wing-shaped clips that grab the gypsum board — no electrician required, and the maker estimates about 30 minutes with basic tools. The dual 15A/125V sockets and a pass-through for your low-voltage cables cover both the power and the signal side of a wall-mounted TV. It’s a kit, so it hides the power cord, HDMI, Ethernet, and A/V cables behind the wall in one go.
The body is molded from flame-retardant polycarbonate, a stiff, heat-resistant plastic the maker says resists bending and cracking to protect the cable long-term. The dimensions are 6.10″L x 7.87″H x 3.74″D, and the slim profile is meant to let TVs and A/V equipment sit flush against the wall. On the front it takes a dual socket, and the front passes low-voltage cable through a brush opening so it looks tidy instead of plugged-in.
Two things to sort before you cut. Wall depth matters — the recessed outlet needs a cavity deep enough to recess fully, and this model states a 3.74-inch depth requirement, so confirm that measurement first. And guiding the cables through the wall is easier with a fish tape or wire snake, since the kit doesn’t include one. Also note this is a no-warranty item, which is worth factoring against the premium tier it sits in.
What you get
- Step-by-step diagrams designed for a 30-minute install
- Wing clips bite into gypsum board without extra brackets
- Dual 15A/125V sockets plus a brush pass-through
- Flame-retardant PC body made to resist bending and cracking
Before you cut
- Needs a 3.74-inch cavity depth, so measure the wall first
- You’ll want a fish tape or wire snake to guide cables
- Ships without a warranty
Best for: a DIYer who wants hand-holding diagrams and a quick wing-clip install.
Check first if: your wall is shallow — this one won’t recess without the depth.
8. Dremica TVBU505-1 Recessed Outlet Box, 2-Pack, 2-Gang, White
Two boxes in the box, each able to drop in vertically or sideways.
For anyone wiring more than one TV wall — or fitting a box for a friend while you’re at it — this two-pack gets you two 2-gang recessed boxes at once. Each is built for both new construction and retrofit, so you’re not limited to a build phase. It takes 2-gang wiring devices and ships with two faceplate options, so it covers standard outlets, GFCIs, USB, HDMI, and Ethernet connections. The textured decorative plate is meant to disappear into a painted wall, and vertical or horizontal mounting gives you real positioning flexibility.
What the construction gets right is that it mounts with positioning tabs for ½-inch drywall — the standard thickness — and includes thumbscrews for a secure wall attachment. It also brings stud screws and wing screws, so you have both routes in one kit. The frame takes two cover plates and two NM cable connectors, so cable management runs cleanly on both. And because you’re often cutting fresh, the box itself can be used as a cutting template — trace it, then cut with an oscillating tool.
The recurring gripe is the locking tabs — they’re brittle, and one can snap if you torque it too hard, so go gently and the tight hole does the rest. The color also reads slightly off a true white — some owners notice a warmer tone against standard white plates and parts, so if the covers will sit uncovered in a bright room, keep that in mind.
Two-for-one value: a pair of castable 2-gang boxes, each with duplex and decorator covers, so you can wire a whole room or a second TV in one order.
Handle with care: the locking tabs want a light touch — snug, don’t crush.
Suits you if: you’re fitting two TVs or two rooms and want matching boxes in one go.
skip it if: you need a single box and want a perfect color match in a bright, uncovered spot.
9. Celendor in Wall Cable Management Kit with Brush Wall Plate and 9.8FT Cord, 2 AC Outlets
The most complete kit here — a 9.8-foot cord and a plug thin enough to vanish.
This is the premium all-in-one: two AC wall outlets on a 9.8FT power cord, a brush wall plate, a drywall saw, and a manual that doubles as a cutting template. It runs on 125V/15A and the maker rates it for up to 1875w max. The cord length is the part that changes planning — 9.8 feet of reach lets you drop the outlet well above where your power currently lives, which matters when the nearest outlet isn’t behind the TV.
Where the premium bites in is the plug. The unique 45° flat plug is only 0.28″ thick and sits completely flush against the wall, so it won’t block the second outlet or push the TV out — a real problem with bulky right-angle plugs. The wiring is UL- and ETL-certified and fire-resistant, and the outlets are tamper-resistant with safety shutters — useful if kids or pets reach low outlets. It’s also sturdy enough that installers come back for it by the case.
The cord is generous but not infinite — one buyer needed more reach in a specific setup, so measure your run before assuming. Beyond that, the install is a cut-and-fit job: two standard holes, about 30 minutes, no complicated wiring. Verify at least 3.74 inches of wall cavity depth first, and this kit largely runs itself.
The premium features
- 9.8FT cord reaches far from your existing outlet
- 0.28″ 45° flat plug sits flush and frees the second outlet
- UL-certified and ETL-certified, fire-resistant, tamper-resistant outlets
- Includes drywall saw, brush plate, and cutting template
Know before you order
- Rated to 125V/15A and up to 1875w max — not a new circuit
- Needs a 3.74-inch cavity depth to recess properly
- The included drywall saw is basic — some swap it out
Pick this if: your outlet is far from the TV and you want a long cord plus the thinnest possible flush plug.
Look past it if: you’re already close to an outlet and don’t need the reach — a smaller kit covers you for less.
Understanding the Specs
Wall Cavity Depth
This is the space behind the drywall where the box has to live. A recessed outlet disappears only if the cavity is deep enough — the Celendor kit asks for 3.74 inches, and the Arlington box is deep enough that you must confirm it won’t reach the opposite side of the wall. Measure the gap between the inside face of your drywall and whatever sits behind it, not the visible wall thickness. Depths vary by where the wall falls, so check before cutting.
Gang Size & Brush Ports
Gang size counts how many devices the faceplate holds: a single-gang box takes one outlet or keystone plate, and a 2-gang box has room for wiring devices plus low-voltage. A brush port is an opening lined with bristles that lets a connector pass through while keeping the cable from falling back into the hole. If you’re hiding both power and HDMI, a 2-gang box or a box with a brush port saves you a second cutout. Bigger boxes need bigger openings, so match the gang size to your cable count.
FAQ
How deep does my wall cavity need to be for a recessed TV outlet?
Can I install a recessed outlet behind a TV without an electrician?
Do I need a 2-gang box or just a single?
Will a GFCI outlet fit inside a recessed box?
What is the difference between a recessed outlet box and a cable management kit?
Can a recessed box be installed in an existing wall or does it need new construction?
What does a brush wall plate do?
How long should I expect installation to take?
Will a recessed box make my TV sit truly flush against the wall?
What amperage and voltage do these outlets handle?
Final Thoughts: The Verdict
The strongest choice for a clean, wired recessed install is the Arlington DVFR2W-1, because its deep 2-gang cavity swallows the plug body and its divider lets you run both power and low-voltage through one cutout — the kind of box an installer reaches for again and again. If you’d rather skip new wiring entirely and want the longest reach plus the thinnest flush plug, the Celendor 9.8FT cord kit is the premium all-in-one to grab. And if you’re hiding power and every signal cable through one neatly split recessed box, the Celendor 2 AC socket kit is the versatile pick worth a look. Measure your wall cavity depth before buying any of them, and the install tends to go as planned.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of September 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, KitchPrep earns from qualifying purchases. This does not affect which products we feature.
Related Guides
