Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
You want the look of a real fireplace without the ash, the chimney, or the gas line — and a 40 inch electric insert gives you exactly that, as long as you measure your opening before you buy. Most buyers who end up disappointed did not get a bad unit; they got one that did not match the rough opening in their wall. This guide walks through eleven real 40-inch-class picks, what each one actually does well, and which size and heat rating fits your room.
I’m Mohammad Maruf — the founder and writer behind KitchPrep. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Recessed versus wall-mounted changes everything about how a unit looks and installs. A flush recess sits near-level with your drywall, while a wall-mounted box stands proud of the surface. The picks below cover both approaches at the roughly 40 inch width, and each one is built around a different room, budget tier, and heating need. Every option here is a solid choice for your space — the goal is matching the right 40 inch electric fireplace insert to your wall and your winter.
Our Picks at a Glance
How To Choose The Best 40 Inch Electric Fireplace Insert
Before you compare anything else, settle three things: your wall opening, your room size, and if you want the flame as a design centerpiece or just a warm corner. Getting those three right makes every other spec decision easy.
Measure your rough opening first
The advertised width is not the size of the hole you cut. A unit listed at 40 inches wide typically needs a rough opening a few inches narrower, and depth matters just as much. A flush recess needs a wall deep enough for the box plus the frame, which is why some picks here call for a 2 x 6 stud wall. Grab a tape and check width, height, and depth before you order — it is the single most common reason a unit gets returned.
Match BTU output to the room you are heating
An insert running at 1500W puts out roughly 5,000 BTU, and that is typically rated for a room in the 400 square foot range. If you are heating a large open living room with high ceilings, treat the insert as supplemental heat, not your main source. Most picks let you drop to a 750W low setting, which is the better choice for a bedroom or a small office where you just want the chill off.
Decide how realistic you want the flame
Two things drive realism: the number of flame color and ember color combinations, and whether the unit fakes the sound of burning wood. Color counts here range widely, from a handful of settings up to a full 60 color combinations. The crackling sound is a divider — some buyers love it, others find it sounds synthetic and switch it off. If sound realism matters to you, check whether the unit lets you disable it.
Quick Comparison
| Model | Best For | Heat Output | Install Type | Flame / Color Setup | Amazon |
|---|---|---|---|---|---|
| Touchstone Forte Elite 40″★ Best Overall | Smart-home living rooms | 1,500W / 5100 BTU | In-wall recessed | 60 color combinations | Amazon |
| Zionheat 40″ Ultra ThinBudget Champion | Slim wall mounts | 750W / 1500W / 5100 BTU | Wall mount or recessed | 12 flame + 12 bed colors | Amazon |
| Tangkula 40″ InsertBest for Consoles | TV console fit | 750W / 1500W / 5100 BTU | Wall mount or recessed | 12 flame + 12 bed colors | Amazon |
| Eueiriup 40″ Ultra Thin | Built-in look | 750W / 1500W | Wall mount or recessed | 12 flame / 5 speed / 5 brightness | Amazon |
| Eueiriup 40″ Upgraded | Value ambiance | 750W / 1500W | Wall mount or recessed | 12 flame / 5 speed / 5 brightness | Amazon |
| Homajor 40″ Insert | Thermostat control | 750W / 1500W / 5120 BTU | Wall mount or recessed | 12 flame colors, 5 intensities | Amazon |
| VEVOR 40″ Insert | 3D flame realism | 750W / 1500W / 5000 BTU | Recessed or wall mount | 9 flame colors, 5 brightness | Amazon |
| PuraFlame Alice 40″ | True flush recess | 750W / 1500W / 5100 BTU | In-wall recessed only | 4 flame settings | Amazon |
| LegendFlame Carl 39″ | Crackle-sound lovers | 750W / 1500W / 5000 BTU | Free-standing or recessed | 4 brightness settings | Amazon |
| Masarflame 40″ Retro | Replacing an old fireplace | 750W / 1500W / 5100 BTU | Recessed insert | 3 atmosphere colors, 5 intensities | Amazon |
| Dreamflame 40″ Wall | Brick-wall classic look | 750W / 1500W / 5000 BTU | Recessed or wall mount | 3 spotlights, 5 brightness | Amazon |
In‑Depth Reviews
1. Touchstone Forte Elite 40″ WiFi Electric Fireplace
Our pick — over 4.5★ from 850+ verified ratings; the strongest balance of quality and price.
The one owners call the best-looking unit in its class — and the smartest one to run.
If your living room is where you spend evenings and you want the fireplace controlled from the couch or your phone, this is the pick. It runs on 1,500 watts and puts out 5,100 BTU, enough to warm a 400 square foot space on a cold night. Unlike the Zionheat ultra-thin below, it needs real depth: 5.5 inches overall and 5.13 inches of chamber depth. That is the trade-off for the bigger flame window and the deeper look.
What wins people over is the appearance — owners go out of their way to praise how realistic the flames look and how the unit does not read as cheap. The media flexibility backs it up with 60 color combinations, split into 6 flame colors and 10 media colors that run independently, plus 3 flame speeds and 5 flame-and-fire-bed intensity settings. You get a full log set, driftwood, and crystals in the box, so you can change the whole look without buying anything extra. It runs on Alexa, Google Home, or the mobile app, and it remembers your flame settings after you flip it off at the wall switch.
The honest caveat: this unit is mostly a visual piece. One measured result worth knowing — buyers report the heater tops out near 1200W (about 10A at 120VAC), not the full 1500W the listing advertises, while the flame effect alone draws just 15-20W. Think of the heat as a supplement that takes the chill off, not a room furnace. The other practical note is installation — the thin border needs precise tile work, with roughly 1/2 inch of overlap, so a sloppy cut shows. For a wall this deep and a look this polished, that precision is worth it. The crowd favorite here: 4.7 stars across 800+ owners.
What earns the top spot
- 60 color combinations (6 flame + 10 media) with independent control for a fully customizable look
- Runs on Alexa, Google Home, or the app, and remembers flames after a wall-switch power-off
- Full log set, driftwood, and crystals included in the box
- 5100 BTU for a 400 sq ft room, with a 68-88°F thermostat range
Where it asks more of you
- Needs 5.5 inches of wall depth — far more than the 3.2-inch ultra-thin options
- Heat reads as supplemental, not a main source
- Thin border demands precise tile work
- Arrives pallet-shipped and heavy at 52 pounds; takes two people to move
Built for you if: you want a smart-home fireplace in a deep wall that looks like a built-in centerpiece.
Think again if: your wall cannot spare 5.5 inches of depth — the Zionheat ultra-thin is the better fit there.
2. Zionheat 40″ Ultra Thin Electric Fireplace
Barely three inches deep, so it slips onto a wall where a full insert simply cannot go.
This is the pick for a thin wall, a hallway, or any spot where you refuse to lose a chunk of the room to a deep firebox. At 3.2 inches deep and 18 inches tall, it is dramatically slimmer than the Touchstone above, which runs 5.5 inches deep and 26.56 inches tall. It comes with a black tempered glass panel and a sturdy steel frame, and Zionheat rates it for both wall mounting and recessed installation.
For warmth, it puts out 5,100 BTU (British thermal units, a measure of heat) and gives you two settings: 750W for a light warm-up and 1500W for real output. The brand claims it can heat up to 450 square feet, the largest coverage figure in this lineup. You get 12 flame bed colors and 12 flame color options with adjustable brightness and speed, so you can set the mood for a party or a quiet evening. You can run the flames with or without heat for year-round use. It is ETL certified (a safety mark for electrical products), cool to the touch on the surface, and carries a 1-year manufacturer’s warranty.
The recurring gripe is cosmetic: the vent grills are not blacked out, so the internal coils stay visible if you look closely. That is a small detail for a unit that otherwise reads as far pricier than it is. There is also a quirky one — one buyer mistook the sleep mode for a fault and nearly returned it, which says more about the remote’s menus than the fireplace. If you want a big flame show from a shallow box, this is the fit.
Slips into tight walls: the 3.2-inch depth and 3.2-inch chamber make it the most surface-friendly option here, ideal for mounting on a wall with no recess cut at all.
Small detail worth knowing: the coils behind the glass are not concealed, so the backside of the unit is visible from up close when the flame is off.
Reach for this if: you want serious flame variety and a 450 sq ft heat rating from an ultra-thin wall unit.
Look elsewhere if: you need a deep firebox look or a concealed internal build.
3. Tangkula 40″ 5100 BTU Electric Fireplace Insert
The one that drops into a TV console and immediately looks like it was always there.
Fitting a fireplace into an existing TV console or media unit is trickier than a wall install, and this is the pick that buyers keep proving works. It measures 4.02 inches deep and 17.32 inches tall, snugging into furniture openings without a custom frame. It handles both wall-mounted and recessed installation, so you have options if you move it later.
The visuals are where it earns its keep: 12 flame colors and 12 bed colors, with 5 brightness levels and 5 speed settings, plus a choice of crystal or log for the ember bed. You can activate a slow color-shift by holding the color button for 6 seconds. Heat comes in at 5,100 BTU with two levels, 1500W and 750W, and a claimed range up to 400 square feet. It is ETL certified and runs from either the touch panel or the remote.
Owners mention two things worth knowing. The appearance draws the most satisfaction — the flames read realistic and the unit looks high-end in a console. But temperature control is the mixed point: this unit cycles between two fixed heat levels rather than holding an exact set temperature, so if you want to dial in a specific degree, look at the Homajor below with its 62°F-82°F thermostat. For everyone else it just works.
Best fit: a standard TV console or media center where you want a realistic flame without a wall cut.
The catch: no true thermostat to hold a set degree — heat is a two-level high/low choice.
Pick this one if: you want a console-ready insert with rich color control.
Skip it for: precise temperature regulation.
4. Eueiriup 40″ Ultra Thin Recessed Electric Fireplace
Slim enough to recess, sturdy enough to heat a whole basement family room.
For a basement build-out or a large finished room, this unit pairs a genuinely slim body with real heat output. It runs at 1500W with a 750W low setting, and buyers use it as a working heat source, not just a backdrop — one notes it warms their main family area well. At 3.2 inches thick it is 20% thinner than typical fireplaces, which matters when you are recessing into a stud wall with plumbing behind it.
You get 12 flame colors, 5 flame speed modes, and 5 flame brightness levels, controlled by remote or touch screen. The unit is ETL approved and includes an auto-heat kill feature that shuts the heater off if it overheats. It can be recessed into the wall or wall-mounted flat, and it is rated for both residential and commercial or office use.
The install is described as straightforward — cut the opening, screw the box in, add the rocks, drop the glass front on. Where this pick stands out is the company behind it: customers note a unit that stopped working months in was replaced quickly and without a fight, which is the kind of service that matters on a wall-mounted appliance. If you want proven heat and a flush look rather than the deepest flame window, this is the strong all-rounder.
Room-heating first: 1500W with a flush 3.2-inch body makes it the pick for a large living room or basement where the fireplace does real work.
Set your expectations: the remote and the flame realism draw more mixed feedback than the appearance does — the flames look great, but a few buyers want a deeper, less digital fire.
A fit for: large rooms and basements where you want the insert to actually contribute warmth.
Not for: buyers who want the deepest possible flame window — the slim body limits that.
5. Eueiriup 40″ Upgraded Ultra Thin Electric Fireplace
Runs its lights all year and quietly takes the chill off when you need it.
Run the flame heat-free in summer, then switch to 750W or 1500W when the room gets cold. It measures 3.2 inches deep, so it recesses or wall-mounts in a tight spot without a heavy build-out. It arrives in polished black with an adjustable multicolor flame.
Customization mirrors the other Eueiriup model: 12 flame colors, 5 flame speed modes, and 5 flame brightness levels set by remote. It is ETL approved and carries the same auto-heat kill overheat protection. Its appearance earns the most praise, with buyers noting it looks like a real small fireplace in the room instead of a light box. The heat output and general functionality both draw positive notes too.
The recurring niggle is the remote — one owner finds the remote response can lag if you are sitting far across the room. That is a small convenience issue, not a defect; the touch and flame controls still work fine. A few buyers also note the heat stays close to the unit rather than filling a large open space, which is expected for its size. For a snug room, that closeness is exactly what you want.
Runs all year: flame-only mode plus 12 flame colors make it a decorative centerpiece you never switch off.
Small gripe: the remote can respond slowly from across a large room — walk closer or use the app-side controls.
Great for: bedrooms and home offices where ambiance matters as much as warmth.
Pass on it if: you need heat to fill a big, open-plan room.
6. Homajor 40″ Recessed Electric Fireplace Insert
A budget insert built like a more expensive one — with a real thermostat to boot.
Where the Tangkula above cycles between two fixed heat levels, this one gives you a genuine thermostat you can dial from 62°F to 82°F. That is the feature to pick it for. The heat output is 5,120 BTU rated for up to 400 square feet, on two settings of 1500W and 750W. It installs recessed, semi-recessed, or wall-mounted, so it adapts to whatever opening you have.
The flame setup is flexible: two ember beds, a log set and crystal stones, both shipping with the unit, plus 12 flame color settings and 5 brightness intensities you control from the LED touch screen or remote. The remote handles power, flame, color, temperature, heater, and timer from the couch. Overheat protection cuts the heater if it gets too hot.
What stands out in owner feedback is build quality — this is a unit that feels heavier and more solid than its price tag suggests, and it reliably clears a low bar most cheap inserts fail. A buyer who had two prior units in the same range fail on them noted this one held up. The one honest wrinkle is the manual: the instructions have typos and are vague on removing the packing behind the glass and placing the crystals, so plan on a little problem-solving. A buyer who wants crackling sound will also find this unit lacks it.
Why it earns its place
- Real 62°F-82°F adjustable thermostat — rare at this tier
- 5120 BTU rated for 400 sq ft on 750W/1500W settings
- Both log set and crystal stones included
- Recessed, semi-recessed, or wall-mounted — flexible install
Small practical snags
- Manual has typos and unclear steps for the glass and crystals
- No crackling sound effect
- Heavier to handle at 55 pounds
Choose it for: a thermostat-controlled insert that feels sturdier than its tier suggests.
Skip the fuss if: you want crackling audio built in.
7. VEVOR 40″ Recessed Electric Fireplace Insert
The 3D flame behind high-clarity glass is the reason to look here.
This unit’s calling card is its flame presentation — a 3D realistic flame set behind high-transparency tempered glass, so the fire appears to sit in the box rather than on a screen. It puts out 5,000 BTU rated for a 400 square foot room, running on dual 750W/1500W modes with a 62°F-82°F thermostat. The core spec to know is depth: 5.91 inches, so this recesses into a wall opening rather than sitting flush against a thin surface.
You get 9 flame colors and 5 brightness levels, both set from an intuitive control panel. An 8-hour timer and built-in overheat protection round out daily use — the heater shuts itself off if it gets too hot. The included kit has the fireplace, a remote, and a manual; the remote takes dry batteries you supply yourself.
Buyers love it. The transformation stories stand out: buyers describe replacing a fire-damaged chimney opening and finishing the space with this insert, and the wording they use is warm — as one puts it, the fireplace “finishes out the room beautifully.” Fit is the thing to plan for, since the 5.91-inch depth and 40.16-inch width demand an accurate opening, and the instructions are included but basic.
Flame-first pick: 3D flame with 9 colors and 5 brightness levels gives a depth of realism the flat-backlight inserts miss.
Measure carefully: at 5.91 inches deep, it needs a true recessed opening, not a shallow wall.
Go here if: the look of the fire is your top priority and you have the wall depth for a 5.91-inch recess.
Move on if: you can only spare 3 inches of depth.
8. PuraFlame Alice 40″ Recessed Electric Fireplace
A built-in that sits truly flush — no box sticking out of your wall.
This is the pick for someone who wants the cleanest possible finished wall. It is in-wall recessed only, designed to fit a 2 x 6-inch stud wall, and it cannot be wall-mounted or used freestanding. Its 5.9-inch depth matches that deeper cavity. If your goal is a fireplace that looks original to the home rather than added on, this is where you land. Unlike the VEVOR above, there is no wall-mount fallback — you are committing to a built-in install.
Two connection options make the electrical side flexible: plug into a 110V outlet or hardwire it. The flame runs on ultra high intensity LED lights for a bright, realistic glow, and you choose an ember bed of either log set or crystal stones. There are 4 flame settings, running from yellow with a little blue at low brightness up to all-blue brightness. The flame works with or without heat. Heating comes via an upper front blower on high 1500W or low 750W, with an adjustable thermostat and a countdown timer you can set from 30 minutes to 9 hours.
Two honest limits stand out. First, heating coverage is rated at 200 square feet — the smallest figure here — and PuraFlame states plainly that it is not meant as a main heat source. Second, the fan is audible when heating, and some buyers find the blower noisier than expected, which is normal for a unit with a built-in fan. Run the flames on their own and the room is quiet. The flame color range is also narrower than most, limited to orange and blue tones rather than the full rainbow of the cheaper linear units.
The flush champion: built for a 2 x 6 stud wall, it recesses cleanly for a genuinely built-in look, with both plug-in and hardwire power options.
Know before you buy: heating is rated for 200 sq ft only, and PuraFlame notes it cannot serve as your main heat source.
Right for: a deep 2 x 6 wall install where a genuinely flush, built-in finish is the whole point.
Wrong for: anyone who needs the unit to heat a large room.
9. LegendFlame Carl 39″ Electric Fireplace Insert (EF265)
The insert people call the most realistic on the list — because it actually crackles.
If nothing kills the illusion faster for you than a silent fire, this is the one. The EF265 adds a fire crackling sound to its realistic flame, wrapping the drama in a three-sided interior brick wall and a clean glass front trim. It comes as a recessed or free-standing insert and plugs into a standard 120V 15amp outlet — note that this model does not offer hardwiring. It heats 5,000 BTU rated for up to 400 square feet, but like most inserts here it is a supplemental heater, not a main source.
The details that make it feel real pile up: a larger, more random flame with 4 brightness settings that shifts from celebratory to romantic to peaceful, a life-like resin log, and nine settings of mood light shining onto the log from above. You get a remote for everything and a one-year warranty.
What reviewers point out most is the overall build and the crackling sound — this is a unit people describe as high quality, and the crackle is the feature that keeps them happy. The honest limits: the heater is described as working quietly but weakly, and one buyer notes it raises the electric bill. A long-term owner also reports that dust and cobwebs can get behind the sealed glass over time with no easy way to reach them for cleaning. Keep the trim kit option in mind, since the flush look depends on whether you finish the gap yourself.
Reasons buyers keep it
- Fire crackling sound plus 9 mood-light settings put the realism over the top
- Larger, more random flame with 4 brightness settings
- Three-sided brick interior and clean glass front trim look built-in
- Plug-and-use install on a standard 120V 15amp outlet
What to weigh
- Heater runs quiet but weak — supplemental only
- No hardwired option on this model
- Sealed glass can collect dust over time with no easy cleaning access
Best for: anyone who wants sound and mood lighting to sell the fire illusion.
Less ideal if: you need strong heat or a hardwired install.
10. Masarflame 40″ Retro Recessed Electric Fireplace Insert
The retro brick insert built to slide into an old firebox and modernize it.
Owners with an old, ugly, non-functioning gas or wood fireplace are exactly who this was made for. The three-sided interior brick wall restores the classic look while the modern unit replaces the mess, and the 5000 BTU output is rated for a room up to 400 square feet. The insert opening requirement is a real spec to check before ordering: 37-37.2 inches wide, 26.6-26.8 inches high, and 8.86-9.06 inches deep. At 8.86 inches deep overall, this is one of the deeper units here, built for a full firebox cavity.
You get life-like resin logs plus an ember bed with 3 color atmosphere lights and 5 variable flame intensity levels. A built-in speaker simulates the sound of charcoal cracking to sell the fire experience, and the whole thing runs from a remote with an 8-hour timer. The 750W/1500W two-level heat lets you run flames with or without warmth for year-round use, and a front air vent on top pushes supplemental heat into the room.
The crackling speaker is the divider. Buyers describe the sound as realistic enough for some and like radio static for others — you can switch it off if it is not for you. The logs read as slightly unrealistic up close, but the lighting and color options make up for it, and buyers repeatedly call the overall quality strong. One practical quirk: the power cord exits the right side rather than the back, so if your framing is tight you will need to drill a hole for it.
Built for a full swap: drop it into an old 37-inch-wide firebox opening and the three-sided brick plus resin logs do the rest.
The sound is a coin flip: the built-in crackle speaker sells the illusion for some and sounds artificial to others — it is optional either way.
Ideal for: replacing an old wood or gas firebox where you want retro character with modern convenience.
Check first: the 8.86-inch depth and right-side cord — both need room in your framing.
11. Dreamflame 40″ Wall Electric Fireplace
A brick-front classic that matches an existing mantel and opening without a rebuild.
This is the pick for someone reviving an existing fireplace opening or matching a mantel already in place. It wears an emulation brick wall that recreates the look of a traditional built-in, using LED technology to fake a burning wood fire with no gas, oil, smoke, or dust. It delivers 5,000 BTU rated for a 400 square foot room on two heat settings, 750W and 1500W, and runs on 110-120V at 15amp with a 6-foot power cable. The suggested opening size to plan for is 37.0-37.2 inches wide, 26.6-26.8 inches high, and 8.86-9.06 inches deep.
Control is thorough: remote or touch, with 3 colors of spotlights, 5 flame brightness levels, the crackling sound, and a timer you set anywhere from 1H to 9H. Every one of those functions runs separately, so you can enjoy the flame without any heat whenever you want. A front tempered glass panel keeps the flames behind glass and wipes clean in seconds. Overheat protection cuts the power if the heater gets too hot or the front vent is covered for a long stretch.
The recurring gripe here is the crackling sound — buyers describe it as loud and unrealistic, and the good news is you can turn it off and keep the flames. One installation note for tight framing: the cord exits the side rather than the back, and there is no included mounting or securing method, which is worth planning around if you have small kids. Set up right, this is a classic-look centerpiece that buyers call beautiful and a great value.
Matched to an existing opening: the brick-front design and 37-inch insert spec make it a natural fit for an old fireplace or TV stand.
Sound and mounting: the crackle reads as loud and artificial to many and can be muted, and the unit ships without a securing method — plan your own anchor.
Pick it for: a traditional brick-look centerpiece that lines up with an existing mantel opening.
Consider another if: the cord routing or lack of a mount kit clashes with your build.
Understanding the Specs
Watts and BTU: what your room actually feels
Electric inserts here run at 1500W on high and put out roughly 5,000 BTU — that is the standard figure, and it is rated for a room in the 400 square foot range. The 750W low setting is your friend for a bedroom or office where you just want the edge off. One number worth knowing: shoppers say one of these units draws closer to 1200W at the wall than the full 1500W stated, while the flame lights alone sip 15-20W. Run the flames without heat and you are barely using any power at all.
Depth and installation: the spec nobody checks until it is too late
Two very different installs hide behind the same “40 inch” label. An ultra-thin unit at around 3.2 inches deep wall-mounts on almost anything, while a full insert like the Touchstone runs 5.5 inches deep and needs a real wall cavity. The flushest of them call for a 2 x 6 stud wall. Always check the insert’s rough opening before you buy — that one measurement decides whether the whole project works.
FAQ
What rough opening do I need for a 40 inch electric fireplace insert?
Can a 40 inch electric fireplace insert heat a whole room?
Do I need a professional to install a recessed electric fireplace?
Is 1500W enough or should I look for more watts?
Will an electric insert fit into my old wood or gas fireplace opening?
Do these electric fireplaces make crackling sounds and can I turn it off?
Can I run the flames without the heater?
How realistic are the flames on a 40 inch electric insert?
How long will a 40 inch electric fireplace insert last?
Is a recessed insert better than a wall mounted one?
Do electric fireplace inserts need venting or a gas line?
Final Thoughts: The Verdict
The best 40 inch electric fireplace insert for most people is the Touchstone Forte Elite 40″ — it holds the highest rating on the list and backs it with a genuinely deep, realistic flame window, 60 color combinations, and Alexa or Google Home control. If your wall is shallow and you want the flame show without the depth, reach for the Zionheat Ultra Thin 40″, whose 3.2-inch body slips onto almost any surface. And if you are replacing an old firebox and want the crackle that sells the illusion, the LegendFlame Carl 39″ is the one to grab. Whatever you pick, measure your opening first — it is the one step that decides whether the install goes smoothly or the box goes back.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of September 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, KitchPrep earns from qualifying purchases. This does not affect which products we feature.
Related Guides
