For hard floors, choose SpinWave if you want quiet, light mopping; pick CrossWave if you prefer vacuum‑and‑wash in one pass.
BISSELL SpinWave Cordless (18V)
BISSELL CrossWave Turbo (3888A)
Budget & Light Jobs
- Daily shine on sealed floors
- Short sessions; smaller homes
- Washable pads; simple care
SpinWave Cordless 23157
All‑In‑One Speed
- Vacuum + mop in one pass
- Hard floors & area rugs
- Self‑clean cycle tray
CrossWave Turbo 3888A
Floor care tools shape how fast you reset the house. One option is a quiet, cordless spin mop; the other is a corded vacuum‑mop that picks up crumbs while washing. You’ll get the quick verdict here, plus the trade‑offs that matter before you click “add to cart.”
In A Nutshell
SpinWave is a light, battery‑powered scrubber for sealed hard floors. It shines when you want quiet, simple upkeep and washable pads. CrossWave Turbo is a plug‑in that vacuums and washes at the same time. It saves passes, handles scattered debris, and can refresh area rugs. The choice comes down to noise tolerance, speed, and how much dry pickup you need.
Side‑By‑Side Specs
BISSELL SpinWave Cordless — What We Like / What We Don’t Like
Get on Amazon With Discounted Price
✅ What We Like
- Quiet scrubbing for sealed hard floors; easy to run during calls or naps.
- Washable mop pads keep ongoing costs low; just toss in the laundry.
- Light 9.5 lb body with swivel steering and a 14 in path for quick rooms.
- 18 V battery with up to 20 minutes for speedy resets and spot duty.
⚠️ What We Don’t Like
- No suction; crumbs and hair still need a broom or vacuum.
- Short runtime means pausing to recharge in large spaces.
- Pads need washing and drying after each use to prevent odors.
BISSELL CrossWave Turbo — What We Like / What We Don’t Like
Get on Amazon With Discounted Price
✅ What We Like
- Vacuum and wash in a single pass; fewer trips across the same spot.
- Two‑tank design keeps clean solution separate from dirty pickup.
- Corded power with a 25 ft cable for long runs without charging.
- Area rug mode adds flexibility beyond hard floors.
⚠️ What We Don’t Like
- Heavier feel and more motor noise than a simple spin mop.
- Brush, filter, and tray need a quick clean and dry after each run.
- Higher total cost tier due to extra parts and formulas.
ℹ️ Good To Know: Empty tanks and wash pads right after you clean. For the CrossWave tray cycle, let the brush and filter dry fully before storage.
SpinWave Or CrossWave: Which Fits You Better
Power & Throughput
SpinWave uses two counter‑rotating pads to scrub and polish sealed floors. It’s great for sticky spots, film on tile, and quick shine. No suction means a broom or stick vac still handles grit. CrossWave Turbo adds suction while a microfiber brush roll lifts soils. That one‑pass approach speeds resets in kitchens and entryways with both wet messes and crumbs.
Coverage is shaped by the power source. The cordless mop runs up to 20 minutes per charge, which pairs well with apartments, bathrooms, and daily wipe‑downs. The corded vacuum‑mop runs as long as the outlet does, so bigger zones are fair game. If you need to clear cereal, pet hair, and spills without juggling tools, the vacuum‑mop is the faster route.
Noise & Comfort
SpinWave is quiet and glides with a light 9.5 lb frame. It’s easy to guide under chairs, around islands, and along baseboards. CrossWave brings motor and airflow noise you’d expect from a vacuum. The trade: more sound and a bit more weight for one‑pass cleanup.
Cleaning & Parts
With the mop, upkeep is simple: remove pads, machine‑wash, and let them dry. Rinse the clean‑solution tank and you’re done. CrossWave Turbo needs a short end‑of‑run routine: set it on the tray, run the cleaning cycle, then remove and rinse the brush roll and filter so everything dries clean. It takes a few minutes, but it keeps odors at bay.
Safety & Standards
Both are designed for sealed hard surfaces. Avoid soaking unsealed wood or open seams. Use the recommended formula for your surface, spray just enough to wet the path, and always let pads or brush rolls dry fully after use. That keeps finishes happy and parts fresh.
Warranty & Service
SpinWave Cordless typically ships with a limited warranty from the manufacturer. CrossWave Turbo models commonly carry a longer limited term at many U.S. retailers. Coverage varies by model and retailer, so always confirm the exact term on the product page before you buy.
Pricing & Packages
Tier & cadence: SpinWave sits in the $$ tier; CrossWave Turbo lands in the $$$ tier. Both are one‑time purchases. You may add pads, brush rolls, and formula as needed.
What’s included: SpinWave bundles soft and scrubby pads plus a trial formula. CrossWave Turbo includes a storage tray, a multi‑surface brush roll, and solution. For current bundles and any warranty details, see the official pages: SpinWave Cordless product page and CrossWave Turbo product page.
Price, Value & Ownership
The vacuum‑mop costs more and asks for brush and filter care. The spin mop runs cheaper to own, since pads go through the washer.
Where Each One Wins
🏆 Quiet Operation — SpinWave Cordless
🏆 Area Rugs — CrossWave Turbo
🏆 Low Upkeep Cost — SpinWave Cordless
🏆 Big‑House Endurance — CrossWave Turbo
Decision Guide
✅ Choose SpinWave Cordless If…
- You want a quiet scrubber for sealed tile, vinyl, or finished wood.
- Your space is smaller, and short, quick sessions fit your routine.
- You prefer washable pads and the lowest ongoing cost tier.
✅ Choose CrossWave Turbo If…
- You want one tool that vacuums crumbs and washes spills at once.
- Your home includes both hard floors and a few area rugs.
- You’re fine with a quick tray cycle and rinsing parts after each run.
Best Fit For Most Homes
Need fewer steps and regular crumb pickup? CrossWave Turbo earns the everyday spot thanks to the vacuum‑and‑wash combo. Want quiet shine at a lower ownership tier and don’t need suction? SpinWave Cordless is perfect for sealed floors and short sessions. Pick the one that matches how you clean on weeknights, not just the biggest mess you handle once a month.