Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your new bathtub faucet has to match the holes already drilled in your tub, or it will sit in the box while you fill the tub with a bucket. Three measurements decide whether you are happy six months later. First, the mounting type: does the faucet sit on the tub deck or stand on the floor? Second, the hole spread your tub already has drilled. Third, the flow rate in gallons per minute (GPM — how much water the spout pushes out every minute).
I’m Mohammad Maruf — the founder and writer behind KitchPrep. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Deck-mounted roman fillers, freestanding floor-mount fillers, and complete tub-and-shower trim kits each solve a different problem. Replacing one dripping spout is a different job than building a whole wet room. The picks below are sorted by what each one does best, with flow rates, hole spreads, and mounting styles side by side, so you pick a bath tub fixtures set that fits your rough-in the first time.
Our Picks at a Glance
How To Choose The Best Bath Tub Fixtures
Measure your tub before you look at a single product photo. Nearly every return in this category happens because the faucet arrived and the holes behind the tub did not line up.
Match the mounting type to your tub first
A deck-mounted faucet sits on the rim of the tub or on a surrounding ledge, and it needs holes drilled there. A floor-mounted (also called freestanding) filler stands on the floor beside a freestanding tub, so it needs no deck holes at all, only a water stub-out in the floor. If you have a freestanding soaking tub with no ledge around it, a floor-mount filler is your only real option. If you have a drop-in or alcove tub with three holes already drilled on the rim, a deck-mount roman filler drops straight in.
Hole count and spread decide whether it actually fits
Count the holes on your tub deck. A three-hole setup is the standard for roman tub fillers with separate hot and cold handles plus a spout. Then measure the distance between the outer holes — the spread. Widespread faucets are built to cover a range of spreads rather than one fixed size, which is why the PARLOS model handles anywhere between 6 and 22 inches between holes. If your old faucet used one hole only, you need a single-hole or centerset design instead, and none of the widespread models here will cover those holes cleanly.
Flow rate matters more than you think
Flow rate is measured in gallons per minute, written GPM. A higher GPM number fills the tub faster, but on a shower head a low GPM number saves water and is often required by local code. The SUMERAIN roman filler moves up to 12.16 GPM, while the PARLOS waterfall sits at 4.6 GPM. On the shower side, the Moen and Delta shower heads both run at 1.75 GPM. A waterfall spout is about the look and the sound, not raw speed, so its lower number is a design trade-off rather than a fault.
Know if you need a valve or already have one
Some trim kits are literally just the visible parts and no valve, while complete systems include the valve that sits behind the wall and mixes hot and cold water. Read that line carefully. The Delta kit and the Moen Gibson both need a rough valve behind the wall to work at all. The Moen Conway kit ships with its own Posi-Temp valve included. If you are not sure what is already behind your wall, a complete system takes the guesswork out of the job.
Quick Comparison
| Model | Best For | Mount Type | Flow Rate | Hole Count | Amazon |
|---|---|---|---|---|---|
| Wowkk Freestanding Tub Filler★ Best Overall | Freestanding tubs | Floor Mount | Waterfall Spout | 1 | Amazon |
| PARLOS Waterfall Roman Tub FaucetBest Value | Compact bathrooms | Widespread Deck | 4.6 gpm | 3 | Amazon |
| SUMERAIN Roman Tub FaucetFastest Fill | Fast tub filling | Widespread Deck | 12.16 gpm | 3 | Amazon |
| Moen Conway Tub & Shower System | Full tub-and-shower swaps | Wall Mount | 1.75 GPM | — | Amazon |
| Senlesen Freestanding Tub Faucet | Modern black bathrooms | Floor Mount | — | 1 | Amazon |
| Moen Gibson Shower Trim Kit | Trim-only updates | Wall Mount | 1.75 GPM | — | Amazon |
| Aolemi Freestanding Tub Faucet | High-arc reach | Floor Mount | 6 GPM Main Spout | 1 | Amazon |
| Delta Modern Tub & Shower Trim Kit | Easy-clean shower heads | Wall Mount | 1.75 GPM | — | Amazon |
In‑Depth Reviews
1. Wowkk Freestanding Bathtub Faucet Waterfall Tub Filler Brushed Nickel
Our pick — over 4.5★ from 900+ verified ratings; the strongest balance of quality and price.
The freestanding filler that owners describe as looking far more expensive than it is.
If you have a freestanding soaking tub with no deck to drill, this is the pick to start with. It stands on the floor on a tripod bracket and bolts (3pcs), so there is nothing to cut into your tub surround. The body is brass, finished in brushed nickel, and the whole thing carries a lifetime limited warranty from Wowkk Sanitary Ware. It is the crowd favorite here at 4.7 stars across 900+ ratings.
At 5.97 kg it outweighs the 2.1 kg SUMERAIN roman filler by nearly three times, and that heft is exactly what owners rave about. Buyers report it feels heavy, solid, and high-end in the hand. It arrives with a Sedal ceramic cartridge (a smooth-turning valve core that resists dripping) for long-lasting operation, a 360-degree swivel spout, and a hand shower on a 59.06-inch hose, so rinsing the tub or bathing a pet is one reach away.
The catch is the waterlines. They ship long for large water flow, and owners mention they can run too long for an upright canister. Wowkk’s customer service solves it — customers note the team sent free shorter lines after a quick call. One owner sums up the whole experience: “the product is sturdy looks very high-end and it’s gonna look great with our deep soaking bathtub.” A few note the shower head can drip after shutoff. Treat the hose length as a setup step, not a flaw.
What earns the top spot
- Brass body in brushed nickel with a heavy, solid feel that reads premium on the floor.
- 360-degree swivel spout plus a hand shower on a 59.06-inch hose.
- Sedal ceramic cartridge for smooth, long-lasting operation.
- Tripod bracket and bolts included for a stable floor install.
Where it asks for patience
- Supply lines can arrive longer than a compact canister needs.
- A plumber is worth calling if your stub-out is awkward.
- A few owners see the hand shower drip after shutoff.
Built for: anyone fitting out a freestanding tub with no deck to drill.
Think twice if: you want a deck-mounted look, because this one stands on the floor instead.
2. PARLOS Waterfall 2 Handle Widespread Roman Tub Faucet Brushed Nickel
A waterfall spout that fits tiny bathrooms and two-inch-thin budgets alike.
This one is the fit-first pick. It installs on three deck holes at any distance between 6 and 22 inches, so a widespread spread is genuinely covered rather than assumed. Hole diameter needs to land between 1.3 and 1.5 inch. No rough-in valve is required, which keeps the job shallow. The look is the whole point: it delivers a smooth waterfall sheet of water without splashing, in a brushed nickel over solid brass that matches most decorating styles.
Flow matters here. At 4.6 GPM mixed, it is a slower fill than the SUMERAIN at 12.16 GPM — the arithmetic favors the SUMERAIN on raw speed, and the PARLOS trades that speed for the waterfall look. Owners on a whirlpool tub notice the longer fill and some say the pressure is not as strong as their old setup. Appearance, though, is what the review pages praise most: “Very nice looks and feels expensive,” goes the common refrain, and the piece reads like a pricier brand once it is in.
Two things to weigh honestly. A small number of buyers see a drip at the base of the neck and get a replacement, so fit the unit dry before you commit. And if your tub is very large, the PARLOS design is corner-focused rather than meant for a big freestanding soaker. For a modest bathroom where the spout is the focal point, this is the value answer.
Where it wins: a compact bathroom with a 3-hole deck and a modest spread gets a designer-looking waterfall spout without a valve rough-in or a plumber’s bill for extra parts.
The honest trade: pressure is not its strength — expect a graceful pour, not a force, and measure your holes before you buy.
Reach for this if: you want a waterfall look on a value-tier spend and have a compact tub.
Look elsewhere if: you need maximum fill speed or a large freestanding tub covered.
3. SUMERAIN 2 Handle Widespread Roman Tub Faucet, Chrome Finish
The one to pick when standing over a filling tub is the part you hate most.
Nothing else here moves water like this. The SUMERAIN pushes 12.16 GPM at 60 PSI, close to three times the PARLOS at 4.6 GPM, so a big soaking tub fills in a fraction of the wait. It is the classic fix for a slow-filling roman tub where the old spout took forever. Owners back it up: the flow feels faster than the original setup and the tub simply fills better.
Build is a solid decision-maker here. The valve body is solid brass with metal handles, and it carries ICC-ES PMG certification with compliance to ASME A112.18.1/CSA B125.1-2018 — the same standard as cUPC certification. The drip-free MS ceramic cartridge is rated for 600,000 on/off cycles, so it should outlast the tub it fills. Note the spout reach: 4-29/32 inches as shipped, and SUMERAIN suggests the 8-3/8 inch reach if your tub is large.
Measure before you buy: this deck model needs three holes with 1-1/4 inch diameters and 8 inch centers for full handle clearance. Owners love that it slots into a small corner exactly, as one puts it, noting a 1/4-inch-longer handle “wouldn’t fit.” The recurring gripe is the included parts — some buyers find a piece missing or fiddly — so confirm the box contents before you start. The chrome finish is mirror-reflective and works with any decorating style.
Why it earns its place: the combination of a 12.16 GPM flow and a certified solid brass body makes this the fill-speed champion of the group without stretching to a premium-tier price.
Set your expectations: the fit is precise and the included parts can need a swap, so measure the holes and inspect the box the day it arrives.
Best for: large roman tubs and anyone tired of waiting on a slow fill.
Skip if: your deck holes are not at an 8-inch spread, because the clearance matters here.
4. Moen 82922SRN Conway Spot Resist Nickel Tub & Shower System
A whole tub-and-shower rebuild in one box, valve and all.
This is the one to buy when you are ripping out an old setup and want every single part in the carton. The Conway kit includes a square showerhead, shower arm, flange, tub spout, handle, trim components, and a compatible Moen Posi-Temp pressure-balancing valve. That valve is the part that keeps your shower temperature steady when someone flushes a toilet elsewhere in the house. The system runs at 1.75 GPM and carries a limited lifetime warranty.
Much of the love here is for the finish. The Spot Resist brushed nickel is built to shrug off fingerprints and water spots, which matters in a busy household. The 8-inch square showerhead is large enough for a rainfall-style spray across your shoulders, and the modern lever handle gives one-handed control of flow and temperature. It is a full-system pick, so the value lines up with everything Moen included rather than the showerhead alone.
The one thing to verify before you buy: this kit ships with its own Posi-Temp valve — the kit does not use the same compatible valve that some Moen 1222 cartridges fit. If a Moen Posi-Temp valve is already behind your wall, you may already be set. Moen describes the compatible valve’s handle as one that rotates to turn the water on and off while adjusting temperature, with escutcheon screws near the 1:00 and 7:00 positions. Check that against your wall before ordering.
What makes it the complete package
- Posi-Temp pressure-balancing valve included, so nothing is missing at the wall.
- Spot Resist brushed nickel finish that resists fingerprints and water spots.
- Large 8-inch square showerhead for a full-body rainfall feel.
- Standard IPS threaded connections for common plumbing setups.
Read before you buy
- You must know if you need the included valve or already have one behind the wall.
- A few buyers find the showerhead is not the strongest pressure.
- Missing parts show up occasionally, so count the box on arrival.
Pick this for: a full bath-to-shower gut job where you want the mixing valve handled.
Look elsewhere if: you only need to swap the visible trim and your valve is already set.
5. Senlesen Bathroom Tub Filler Faucet Floor Mounted Waterfall Spout Freestanding Tub Mixer Tap with Handheld Sprayer Matte Black
For the freestanding soaker that wants a matte black statement piece.
This floor-mount filler brings a single lever handle for temperature and flow plus a separate diverter knob to switch water between the tub spout and the handheld sprayer. It stands on a high, stable tripod base with bracket and bolts to lock it to the floor. The body is brass with stainless steel, finished in a matte black that suits a modern wet room where light and dark are the whole scheme.
The hand shower is on a 90 cm stainless steel braided hot and cold supply hose, and Senlesen will custom-length the hoses if the standard run does not suit your water supply. Owners praise the look and the feel — the swivel head is a genuine convenience on a raised tub, and after nearly six months of daily use that usefulness has not worn off. A powerful flow and a functional hose are the everyday wins here. The decorative bonus is that the matte black ties into black tile and stone trim without a fight.
Two real caveats. Several reviewers point out leakage at the diverter or the on/off knob over time, and Senlesen ships a replacement cartridge if that happens. And the instructions are genuinely thin — inlet markings are missing, which is why the cold line is the one near the diverter knob and the hot is the rear. Budget a couple of hours if you are doing this without a plumber.
The real draw: a modern floor-mount filler with a swivel spout and a diverter-fed hand sprayer, in matte black, with custom hose lengths available — practical for a clean-lined bathroom.
Be ready for: the poor instructions and the chance of a leaking cartridge, both of which customer service can offset with a replacement part.
Made for: a modern, dark-toned freestanding tub setup that wants a floor-mount filler with a sprayer.
Only pass if: you want labeled instructions and zero risk of a cartridge swap down the line.
6. Moen Gibson Pressure Balancing Eco-Performance Showerhead, Shower Handle, and Tub Spout, Matte Black, T2903EPBL
A bold matte black trim set for a wall-mounted tub and shower that is already plumbed.
Here is the pick for a shower wall that is already fitted with a valve — this trim kit dresses it in matte black and adds a tub spout and single-handle control. The kit is built on Moen’s M-PACT common valve system, which lets you change the faucet’s style later without touching the plumbing behind the wall. It carries Moen’s Limited Lifetime Warranty and runs at a 1.75 GPM eco flow.
The design is the draw. A matte black finish makes a statement in a dated bathroom much faster than swapping tile, and owners love how the trim modernizes the space. Appearance and quality top the review pages, and the trim survived a real drop test — one installation withstood a four-foot fall without damage to the finish. You get the showerhead, handle, shower arm, flange, and tub spout in one coordinated set so nothing looks mismatched.
Be careful with the finish. Owners warn against letting wrenches near the finished portion of the trim, because hand-tightening plus a screwdriver gives you all the leverage you need without flaking the coating. The included tub spout also draws mixed notes — a few owners see it spray unevenly, and others skip it in favor of a copper-pipe setup to avoid back pressure. And this kit truly needs Moen valve 2510 behind the wall, because it is trim only.
Where it shines
- Matte black trim set that modernizes a dated shower in one afternoon.
- M-PACT common valve system for future style changes without replumbing.
- Eco-performance 1.75 GPM flow with pressure balancing.
- Single-handle control for easy temperature adjustment.
What to know going in
- Valve 2510 must be purchased separately — the kit is trim only.
- The finish flaking risk with tools means hand-tighten only.
- The tub spout gets mixed notes on spray uniformity.
Choose it when: your shower valve is already in the wall and it just needs the black finish to catch up.
Hold off if: you want a full system from scratch, since you will also need to buy Moen valve 2510.
7. Aolemi Freestanding Bathtub Faucet Tub Filler Stand Alone Matte Black
A tall, swiveling spout that clears a deep soaking tub with room to spare.
What sets this apart is the reach: a 9-inch spout reach and a 41-inch spout height give you real clearance over a tall tub, and the curved high-arc spout rotates a full 360 degrees so you can aim the stream where you want it. The main spout delivers up to 6 GPM through 1/2-inch large-diameter supply hoses, so the tub fills faster than a standard spout. The cylinder hand shower runs at 1.8 GPM for hair washing, rinsing, or bathing pets. The 59-inch shower hose gives you the slack to reach around the tub.
Build is all-metal — a solid brass body with a stainless steel straight tube meant to resist rust and corrosion. The step-up from the Wowkk is the reach and the high arc, which makes a difference on an oversized freestanding tub where a shorter spout splashes the rim instead of the basin. Owners describe it as looking like far more expensive models, and the way it transforms a bathroom is a recurring theme. The swivel makes cleanup and container filling easier too.
Budget extra time for install. This model is fussier than the Moen trim kits — the rough-in stub-outs need 1/2-inch male threads protruding 0-1/2 inch, 1.5 inches apart, and the supplied 31-inch hoses come too long for some installs, with kinked hoses causing water damage on one job. The manufacturer ships custom hoses in about a week once you report it. Leakage from the handle or wand shows up often enough that Aolemi’s quick replacement service is the saving grace. Order it, install it, and keep the packaging handy until you have run water through it.
Why buyers reach for it
- Towering 41-inch spout height with a 9-inch reach for deep tubs.
- 360-degree swivel high-arc spout for flexible positioning.
- 6 GPM main spout on 1/2-inch supply hoses.
- All-metal brass body and stainless steel tube.
Plan for this
- Rough-in tolerances are tight and the supplied hoses can run too long.
- Leakage from the handle or wand is a common enough issue.
- Returns and replacements lean on Aolemi’s customer service.
Best for: oversized freestanding tubs that need serious height and reach from a matte black filler.
Not ideal if: you want a fuss-free install — the Moen kits above are far more forgiving at the rough-in.
8. Delta Faucet Modern Brushed Nickel Tub and Shower Trim Kit, Single-Spray Touch-Clean Shower Head, T14467-SS-PP (Valve Not Included)
The shower head you clean with a fingertip instead of a bottle of descaler.
Delta’s Touch-Clean story is the reason to look here. The spray holes let you wipe away calcium and lime build-up with a touch of a finger, which is the answer for anyone in a hard-water area who is tired of scrubbing a scaled-up shower head. The finish is a brushed stainless with a SpotShield coating to resist water spots and fingerprints, and the shower head is an 8.69-inch diameter at 6.5 inches tall. It runs at 1.75 GPM and carries a Lifetime Limited Warranty.
The safety piece is real value at this level. The included Monitor pressure-balanced cartridge keeps shower temperature steady by balancing hot and cold pressure, so a toilet flush or a running appliance elsewhere does not send a shock of cold over you. Quality and appearance are what owners praise most — the set installs cleanly, looks exactly as pictured, and the single-spray shower head delivers a full-body spray. It is a name-brand trim kit that most people buy on reputation and get exactly what they expected.
Two facts to weigh. The rough valve is sold separately — buy Delta’s MultiChoice Universal Shower Valve, with model R10000-UNBX recommended. And a few owners find the showerhead smaller than they hoped, and some report scratches on delivery, so inspect the box before you install. If you want a bigger spray face, the Moen Conway’s 8-inch square has it.
What stands out: Touch-Clean spray holes and a SpotShield finish make this the lowest-maintenance shower trim on the list, ideal if your water leaves scale behind.
Budget for: the separate R10000-UNBX rough valve, since this kit is trim only.
Great for: hard-water bathrooms and anyone who wants a name-brand trim kit with an easy-clean shower head.
Consider a different pick if: you want a larger shower face or a kit that includes its own rough valve.
Understanding the Specs
Flow rate explained
Flow rate is simply how much water comes out per minute, measured in gallons per minute (GPM). A higher number fills the tub faster — the SUMERAIN moves 12.16 GPM, while the PARLOS waterfall runs at 4.6 GPM. On a shower head, though, a lower number like 1.75 GPM saves water and often satisfies local efficiency rules. Match the number to what you care about: fill speed on the tub spout, water economy on the shower head.
Mounting type and hole spread
Mounting type is where the fixture lives: deck mount sits on the tub rim or surrounding ledge, floor mount (freestanding) stands on the floor beside the tub, and wall mount attaches to the wall above. Hole spread is the distance between your drilled openings — the SUMERAIN wants 8-inch centers, while the PARLOS covers any spread between 6 and 22 inches. Measure your existing holes before you shop, because a spread mismatch is the most common reason these go back.
FAQ
How do I know if my setup is deck mount or floor mount?
Will a widespread roman tub faucet fit my existing three holes?
What does “valve not included” mean and do I need one?
Which flow rate should I pick for my bathtub?
Can I install a freestanding tub faucet myself or do I need a plumber?
What is the difference between Posi-Temp and Monitor pressure balancing?
How do I keep a brushed or matte finish looking new?
My freestanding faucet started leaking — is that normal?
Do these tub fixtures include the drain and overflow?
Which is better, a waterfall spout or a standard tub spout?
Final Thoughts: The Verdict
For most freestanding tubs, the bath tub fixtures winner is the Wowkk Freestanding Bathtub Faucet because it pairs a brass body and brushed nickel finish with a 360-degree swivel spout and a hand shower on a 59.06-inch hose, all backed by a lifetime limited warranty. If you have a three-hole deck and want the fastest fill, grab the SUMERAIN Roman Tub Faucet at 12.16 GPM. And for a full tub-and-shower rebuild where the mixing valve is handled in one box, the Moen Conway System is the one to reach for. Check your hole spread before you buy — the SUMERAIN needs 8-inch centers while the PARLOS covers 6 to 22 inches — and the rest of the job goes smoothly.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of September 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, KitchPrep earns from qualifying purchases. This does not affect which products we feature.
Related Guides
