Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
You want a cordless circular saw that arrives with the battery in the box, cuts real lumber, and doesn’t die halfway through a deck board. This guide compares ten kits that all include a battery and charger, so you can skip the bare-tool trap and pick the one that matches your actual workload. The top pick here is the DEWALT DCS578X2 — the crowd favorite at 4.8 stars across 700+ owners — but the right saw for you depends on blade size, bevel range, and how many batteries you need.
I’m Mohammad Maruf — the founder and writer behind KitchPrep. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
That is exactly what this guide breaks down for the battery circular saw with battery.
Our Picks at a Glance
How To Choose The Best Battery Circular Saw With Battery
A cordless circular saw lives or dies by three things: how deep it cuts, how far it bevels, and whether the kit actually gives you enough battery to finish the job. Buying a saw without a battery in the box costs you more later, so every pick here includes one. What changes between them is blade diameter, bevel range, motor type, and how many batteries ship in the kit.
Match blade size to the lumber you cut most
A 6-1/2-inch blade handles 2×4 framing and plywood cleanly but runs out of depth on thicker stock. A 7-1/4-inch blade cuts deeper at 90°, which is why the DEWALT DCS578X2 reaches a maximum cut depth of 2-9/16-inch at a 90 degree bevel. If you frame or cut thick timbers, size up; if you trim and sheet plywood, the compact 6-1/2-inch saws are lighter to swing all day.
Understand bevel capacity before you buy
Bevel capacity is the maximum angle the saw’s base can tilt, measured in degrees. A saw with 0-45° bevel handles standard miters, while a saw like the DEWALT DCS590WW1 goes to 57 degrees for steeper cuts. Bevel stops at 22.5 degree and 45 degree let you snap to common angles without eyeballing, which matters on trim work.
Check battery count and motor type
Brushless motors run cooler and stretch runtime versus brushed motors, and they’re standard on most saws here. But the number of batteries in the kit is the bigger practical split: the DEKOPRO DKCS20Q1Y-G ships two batteries in the box, while the DEWALT DCS578X2 also includes two 9.0Ah packs. Two batteries means you keep cutting while one charges.
Quick Comparison
| Model | Best For | Blade Size | Bevel Range | Batteries Included | Amazon |
|---|---|---|---|---|---|
| DEWALT FLEXVOLT DCS578X2★ Best Overall | Heavy framing and framing crews | 7-1/4-inch | 57 degrees | 2 | Amazon |
| Dong Cheng 20V BrushlessBest Value | Budget framing and renovation | 7-1/4-inch | 0-45 degrees | 1 | Amazon |
| DEKOPRO 20V DKCS20Q1Y-GMost Compact | Occasional DIY with two batteries | 6-1/2-inch | 0-45 degrees | 2 | Amazon |
| SKIL PWR CORE 20 CR6413B-11 | Compact trim and crosscuts | 6-1/2-inch | — | 1 | Amazon |
| WORX WX526L | Light DIY fence and deck work | 6-1/2-inch | 0-50 degrees | 1 | Amazon |
| CRAFTSMAN CMCS500M1 | Household projects and Craftsman owners | 6-1/2-inch | 50 degrees | 1 | Amazon |
| Metabo HPT C3607DB | Track saw users and heavy ripping | 7-1/4-inch | 55 degrees | 1 | Amazon |
| DEWALT 20V MAX XR DCS590WW1 | All-day cutting with an 8 Ah pack | 7-1/4-inch | 57 degrees | 1 | Amazon |
| FLEX FX2141R-1J | Worm-drive feel and raw power | 7-1/4-inch | — | 1 | Amazon |
| Makita XSR01PT | Pros who run rear-handle saws | 7-1/4-inch | 90 degrees | 2 | Amazon |
In‑Depth Reviews
1. DEWALT FLEXVOLT 60V MAX* Circular Saw with Brake Kit, 7-1/4-Inch (DCS578X2)
Our pick — over 4.5★ from 700+ verified ratings; the strongest balance of quality and price.
A 7-1/4-inch framing saw with a 57-degree bevel and two 9.0Ah batteries.
The defining number here is 57 degrees — that’s how far the DCS578X2 tilts its base, compared with the 45 degrees the Dong Cheng 20V brushless kit tops out at. If you cut common miters, that gap is invisible; if you cut steep rafter angles, it changes what you can do on the saw alone. DEWALT rates it at up to 47% more power than the DCS575 model, and the 7-1/4-inch High Speed Steel blade reaches a maximum cut depth of 2-9/16-inch at a 90 degree bevel.
Two FLEXVOLT 9.0Ah batteries ship in the box alongside a charger, blade, blade wrench, and kit bag. The 9.0Ah packs are the reason owners describe cutting up to 8 hours on a single charge — that’s a full shift for many framing and roofing jobs. An electric brake stops the blade the moment you release the trigger, an LED lights the cut line, and an integrated rafter hook lets you hang the saw off a rafter instead of setting it down in the mud.
The one thing to check on arrival is shoe alignment at 0° and 45° — the shoe is not user-adjustable, so a misaligned unit has to go back. That’s the trade-off with this level of power: more torque means more to check. Also note the plastic and rubber components won’t feel as armored as a corded saw’s, and the included bag runs small for the saw plus two fat 9.0Ah batteries.
What the crew talks about
- Two 9.0Ah FLEXVOLT batteries run up to 8 hours per charge for framing and roofing work
- 57-degree bevel range with stops at 22.5 and 45 degrees for sloped cuts
- Electric brake, integrated LED, and rafter hook come standard — no add-ons
Before you commit
- Shoe alignment is not user-adjustable — verify 0° and 45° settings on arrival
- Plastic and rubber parts feel less dense than on corded saws
- Included kit bag is small for the saw plus both 9.0Ah batteries
Go with it if: you frame, roof, or cut thick stock all day and you want one cordless saw that punches like a corded one.
Look past it if: your work is light trim and you would rather not carry two 9.0Ah batteries around a shop.
2. Dong Cheng 20V Brushless Cordless 7-1/4-Inch Circular Saw Kit
An 800-watt brushless motor and full 7-1/4-inch blade at a price that undercuts the majors.
If you want 7-1/4-inch blade capacity without the premium-brand tag, this is where the budget math lands. The 800W brushless motor spins at 5,000 RPM and cuts hardwood, plywood, PVC pipe, and decking. The 7-1/4-inch blade delivers 65mm depth at 90° — enough for a 2×4 — and 45mm at 45° for baseboard miters. Bevel range runs 0-45°, so it stops short of the DEWALT DCS578X2’s 57 degrees and the Metabo HPT C3607DB’s 55 degrees, but for straightforward framing and renovation it reaches the angles you actually use.
The kit bundles the 20V 4.0Ah lithium-ion battery, charger, a 24T blade, a 40T blade, a rip fence guide, and a universal vacuum adapter. That’s a lot of accessories for a single-battery kit. The dust port hooks to a wet/dry vac or a sawdust bag, which pays off during drywall cutting and subfloor work. A trigger-lock switch guards against accidental startups, and the anti-slip grip plus balanced body keep arm fatigue down on longer deck jobs. The battery is interchangeable with other 20V tools from the same brand, so the platform grows with you.
Buyers report the trigger safety takes some getting used to: “After about an hour or so I got used to it but hard to start out with.” That’s one plan your first cuts around if you are new to the brand’s two-finger startup.
Where it lands: full-sized 7-1/4-inch blade, two blades in the box, a 4.0Ah battery, and a vacuum adapter for a fraction of premium kits.
Buy it for a 7-1/4-inch blade and two blades in the box at a budget price; skip it if you need bevels past 45 degrees or all-day durability.
3. DEKOPRO 20V Cordless Circular Saw, 6-1/2-Inch Blade, 4500 RPM with 2 Battery and Charger (4.0Ah)
Two 4.0Ah batteries in the box, so you keep cutting while the first one charges.
Most 6-1/2-inch kits ship one battery. This one ships two — that’s the reason it hangs around in a list like this, and it’s the single biggest practical difference between it and the SKIL CR6413B-11, which includes a single 2.0Ah pack. The 20V motor turns 4500/min no-load speed and drives a 165mm carbide-tipped blade with 24 teeth, which leaves clean edges on hardwood and softwood. The handle is ergonomic, and the saw weighs 4.29 kg, so it’s light enough to maneuver one-handed while you’re steadying material with the other.
The bevel adjusts 0-45 degrees, and a laser projects a line onto the workpiece — owners mention the laser helps keep cuts straight, which is a real time-saver if you don’t own a track. The blade is a 6-1/2-inch carbide-tipped unit with 24 teeth and a depth adjustment feature. A bag is included, and the makeup of the box is generous for the tier.
Reasons owners keep it
- Two 4.0Ah batteries ship in the box — not one
- Laser guide helps keep cuts straight on long rip passes
- Light body at 4.29 kg keeps hand fatigue low on trim work
Trade-offs to know
- Battery life feedback is split — some owners get long runtime, others don’t
- Laser is too dim to read in bright outdoor daylight
- Battery has to be pulled and reseated if the blade binds mid-cut
The short answer: a two-battery compact kit that suits weekend projects, fence sections, and short trim runs.
The honest limit: if you plan to cut all day long on a single charge, expect to keep swapping between those two packs.
4. SKIL PWR CORE 20 Brushless 20V 6-1/2-Inch Cordless Compact Circular Saw Kit (CR6413B-11)
The left-blade compact that puts your cut line right in front of your face.
The blade-left layout is the whole point of this saw — it puts the blade between you and the offcut so you can see your line without leaning. The brushless motor spins up to 5,500 RPM, and SKIL rates it at 105 cuts in 2×4 pine per charge with the included 2.0Ah battery. The kit includes the saw, an 18T carbide thin kerf blade, a 20V 2.0Ah PWR CORE 20 lithium battery, a standard charger, a vacuum adaptor, and a stored hex key. The blade bolt needs only a hex key stored on the tool, so blade changes stay quick.
An LED casts a shadow across the blade — SKIL calls it Shadow Line — so you can see the kerf on the material even in low light. An electric brake cuts the blade speed fast for safety. PWR CORE 20 battery tech wraps each cell in cooling material, which SKIL states stretches runtime 25% longer and doubles battery life versus the previous design. A rip fence screw and vacuum adaptor are included for guided cuts and dust management.
Runtime is the piece to plan around: the 2.0Ah pack will get you through a handful of crosscuts but not a stair stringer build. Owners also flag the blade bolt — it can be stubborn the first time, and reviews at the time of writing disagreed with the manual’s stated turn direction for loosening it. If you buy this for light trim, plumbing strapping, and odd cuts, that frustration is a onetime thing. It isn’t the saw for high-volume deck framing.
The design win: blade-left positioning, a shadow-cast LED, an electric brake, and 5,500 RPM in a body that handles like a hand saw. Light surface cuts and stop-and-go trim work are what it was built for.
Buy it for trim, sheet goods, and small stock in tight spaces; skip it for framing-level volume.
5. WORX Cordless Circular Saw, 20V 6-1/2-Inch, WX526L
A 6.4-pound fence-builder that hangs together all afternoon without wearing out your forearm.
At 6.4 lbs with the battery installed, this is one of the lightest saws in this roundup — lighter than the 8.2-pound DCS578X2 and the 8.3-pound Metabo HPT C3607DB. If you’re up on a ladder hanging fence boards or working overhead, that difference is what keeps your arm going past the third post. The brushless motor cuts through 2x lumber at 90° with a maximum cutting depth of 2-3/16″ and spins up to 4,700 RPM.
The PowerShare system is the standout: any 20V WORX battery works in this saw, and you can combine 20V batteries to power 40V or 80V WORX tools. If you already own other WORX tools, that’s a single-platform advantage. The bevel goes 0-50°, wider than the 0-45° range on the DEKOPRO DKCS20Q1Y-G and the Dong Cheng kit, and the depth is adjustable. A dual-handle grip and a built-in LED round out the control features. The kit includes the saw, a 20V 2.0Ah battery, a 2A quick charger, a vacuum adaptor, a hex key, and a TCT 24T blade.
The stock 2.0Ah battery is what holds this one back on the power side — owners note it struggles on thicker material. Upgrade to a WORX 4.0Ah pack and you get longer runtime and better cutting power, which is the usual WORX-battery-owner move. Otherwise, the 0-50° bevel and dual-handle grip earn their keep on fence pickets, 2x4s, and trim. Save the heavier work for a saw like the Makita XSR01PT or the FLEX FX2141R-1J.
Good fit for: DIY fence, deck, and trim jobs where weight matters more than raw torque.
Skip if: you routinely cut through 2×6 and thicker — the 2.0Ah starter battery will hold you back until you upgrade it.
6. CRAFTSMAN V20 Cordless Circular Saw Kit, 6-1/2 inch (CMCS500M1)
The V20 kit that plugs straight into a Craftsman household’s existing battery fleet.
If you already own Craftsman V20 tools, this is the saw that joins the platform rather than starting a new one. It takes the same V20 battery as Craftsman weedeaters, drills, and other 20V tools, so one battery charges across the whole set. The motor runs at 4,000 RPM — a touch slower than the DEKOPRO’s 4500/min and well below the 5,500 RPM DEWALT DCS590WW1 — but the 6-1/2-inch blade cross-cuts and rips 2X material cleanly.
The bevel shoe pivots up to 50° tool-free, so you can angle the base without a wrench. A contoured over-molded handle keeps grip comfortable through longer cuts, and the compact body is designed to reduce fatigue on household jobs. The kit ships with the saw, a 6-1/2 in. 18T blade, a hex wrench, a battery, and a battery charger, so everything you need is in the box.
For household projects — shelving, fence repair, and plywood rips — the CMCS500M1 covers most of what a 7-1/4-inch saw does, in a lighter body. The trade-off is power on thick stock: it slows on 2×6 and 3/4-inch plywood where the higher-RPM saws above keep humming. If your work is a couple of lengths of 2×4 at a time, that’s not a problem. If you routinely push the saw through 2×6 all afternoon, consider stepping up.
Where it wins: a 50° tool-free bevel, an over-molded grip, and V20 battery compatibility make this a fluid add-on for a Craftsman-heavy garage. A compact body that trades max RPM for manageable weight in household use.
Buy it if you already own Craftsman V20 batteries; pass on it if you rip 2×6 and thicker stock all day.
7. Metabo HPT 36V MultiVolt 7-1/4-Inch Circular Saw with Torque Boost, C3607DB
A track-compatible 6,000 RPM saw that skips the cord without skipping the power.
The headline number here is 6,000 RPM — the highest RPM of any saw in this roundup, above the 5,500 RPM DEWALT DCS590WW1 and the 5,100 RPM Makita XSR01PT. Metabo HPT also states it is more than 25% faster and 40% more torque than its predecessor. The Torque Boost button, when pressed, adds cutting force for thicker and denser material — a good fit when you’re up against maple ply or wet pressure-treated lumber.
The 7-1/4-inch blade sits on a durable aluminum base plate designed for framing, and the saw weighs 7.9 pounds. The bevel tops out at 55 degrees, splitting the gap between the 0-50° WORX WX526L and the 57-degree DEWALT DCS590WW1, and a visible cutting depth indicator keeps the cut aligned. A rafter hook stores the saw at the job site, and a larger sub-handle gives an easier grip. A 36V/18V MultiVolt 4.0Ah/8.0Ah battery, charger, blade, and carrying bag are all included, plus a lifetime tool warranty.
The trade-off is calibration: the depth gauge holds up, but the bevel and miter stops are where some customers note needing to fettle. The official spec carries a miter lock preset at -1/-2 on some units. If you’re cutting trim where a degree off matters, plan to check the indicator against a square on first use. And the dust port doesn’t play well with common hoses — a 3D-printed adapter is a common fix among owners.
What justifies the ask
- 6,000 RPM and Torque Boost mode for dense or thick material
- 55-degree bevel range with an aluminum base plate for framing
- MultiVolt 4.0Ah/8.0Ah battery, charger, blade, and bag included
What to expect going in
- Bevel and miter stops may need checking against a square on setup
- Dust port sizing doesn’t match common shop hoses from the start
- No riving knife or anti-tip feature, so use a track for long rips
Reach for it if: you rip plywood and sheet goods against a track, and want cordless 6,000 RPM with a lifetime tool warranty behind it.
Look elsewhere if: you want dead-on angles from minute one and don’t want to check the bevel stops yourself.
8. DEWALT 20V MAX XR Brushless Cordless 7-1/4 in. Circular Saw Kit (DCS590WW1)
The 8 Ah single-battery saw that trades battery count for a longer single-charge run.
Up to 368 cuts per charge from a single 8 Ah DCB2108 battery — that’s the number that separates this kit from the two-battery DEKOPRO and Dong Cheng kits. One battery, one charger, no swapping mid-job. The brushless motor spins up to 5,500 RPM no-load and produces up to 1,700 mwo, DEWALT’s own measure of cutting power. Max cut depth runs 2-9/16 in. at 90° and 2 in. at 45°, matched to the 7-1/4-inch blade in the box.
Bevel runs up to 57 degrees, tying with the DEWALT DCS578X2 for the widest tilt in this roundup. An electric brake stops the blade immediately after you release the trigger, which prevents coasting into your line when you’re trimming cutouts. The kit bundles the saw, the 8 Ah POWERPACK battery, a charger, a blade change wrench, and a 7-1/4 in. 24T blade. A 3-year warranty on material and workmanship covers the tool.
The safety switch sits on the top of the handle and needs a thumb push to release, which owners flag as slightly awkward when starting a cut overhead or in an awkward position. If you cut left-handed or overhead frequently, plan for a brief adjustment. Otherwise the single-8Ah design solves the battery-swap problem and keeps the workflow clean.
Why owners value it: up to 368 cuts from one 8 Ah pack, a 57-degree bevel range, an electric brake, and 5,500 RPM — one-battery simplicity with real headroom for a full day. Reach for it if you want the longest single-charge run of the compact DEWALT 20V roundup.
Pick it for one 8 Ah battery and no mid-job swaps; choose the Makita XSR01PT if you want two batteries instead.
9. FLEX 24V Brushless Cordless 7-1/4-Inch Rear Handle Circular Saw Kit (FX2141R-1J)
A rear-handle monster that pulls like a worm drive and charges on a 280W rapid charger.
The rear handle and 10.0Ah stacked lithium battery are the defining pair here. Rear-handle geometry puts the motor closer to the cut for balance, and the 10.0Ah pack is the biggest single battery in this roundup — bigger than the 8 Ah in the DEWALT DCS590WW1 and equal to the combined capacity approach of the two-battery Makita XSR01PT. The 280W rapid charger refills that pack quickly, so a short break usually tops you back up.
The rear-handle layout is also the catch: this model is shiped in left-handed configuration, so right-handed users who want the classic orientation will need to arrange a return. The magnesium handle material keeps the handle light while staying rigid, and the saw is built with a worm-drive-style power curve that owners compare to a corded Skil Mag 77 — similar or better torque without the cord.
Register the tool, battery, or charger within 30 days of purchase and FLEX provides a limited lifetime warranty (registration required through December 31, 2025). The 24V brushless motor is built for continuous power on larger framing and timber cuts. If you cut big material for a living, this is one of the shortest paths from corded to cordless. If your work is trim and plywood, the rear-handle format will feel like overkill for the job.
The pitch in one sentence: a rear-handle worm-drive feel with a 10.0Ah battery and a 280W rapid charger, backed by a limited lifetime warranty once registered. Left-handed layout is intentional — confirm the handedness matches your grip before ordering.
Buy it for worm-drive-class power on a single 10.0Ah battery; it’s not for you if you’re right-handed, since this kit ships left-handed.
10. Makita XSR01PT 36V (18V X2) LXT Brushless Rear Handle 7-1/4″ Circular Saw Kit (5.0Ah)
A rear-handle saw that runs two 18V 5.0Ah batteries in series for 36V.
Two 18V LXT 5.0Ah batteries run in series for a combined 36V, which is what gives this kit its headroom. The brushless motor turns 5,100 RPM and, per Makita, delivers up to 50% longer run time per charge than the brushed motor it replaces. The published cut counts are up to 558 crosscuts per charge in 2×4 SPF lumber and up to 291 crosscuts per charge in 2×10 SPF lumber. Both numbers use the two 5.0Ah packs together.
The rear-handle geometry puts the weight behind the blade, which reviewers point out keeps the cut tracking straight through wet pressure-treated lumber and LVLs. Automatic Speed Change technology adjusts cutting speed and torque through the cut, so it self-manages on dense vs soft material. The kit includes the saw, a 7-1/4″ 24T ultra-coated C.T. blade, two batteries, a charger, and a wrench. The blade sits on the 7-1/4-inch platform with a maximum cutting angle of 90 degrees for through-cuts.
The 23.1-pound shipping weight measures the whole kit including batteries and charger — the saw isn’t that heavy in hand once the batteries are seated. Owners do note the saw’s physical size is bigger than a compact 6-1/2-inch saw, and dust collection is one of the weaker features, so plan a vac or mask for drywall dust. For framing and daily job-site work, that trade is what buys you the 36V power and rear-handle balance.
Ideal user: a framing or renovation pro who wants rear-handle function, two batteries in the kit, and near-corded cut counts. A quieter motor and long runtime on two 5.0Ah packs sweeten the case.
Less ideal for: someone who wants a small, light saw — the LXT rear-handle format is a substantial tool in the hand, and dust collection isn’t its strong suit.
Understanding the Specs
Blade size and maximum cut depth
Blade size in inches sets your maximum cut depth. A 7-1/4-inch blade with a maximum cut depth of 2-9/16 inch at 90° crosses a 2×4 in one pass, and can bevel-tilted for angled cuts. A 6-1/2-inch blade is lighter and quicker to handle, good for trim and plywood, but runs out of depth on thick timbers. Pick blade size by the thickest material you cut most often, then work backward from there.
Bevel range and RPM
Bevel range is how far the saw’s base tilts, measured in degrees. A 0-45° saw handles standard miters; a 50° or 57° saw covers steeper angles for rafters and barn framing. RPM, or revolutions per minute, measures how fast the blade spins — 5,500 RPM cuts faster through lumber than 4,000 RPM but pulls more current, so pair higher RPM with a bigger battery. Both numbers together decide how the saw feels in real work.
FAQ
How do I know a saw actually includes a battery and is not a bare tool?
What blade size do I need for cutting 2×4 lumber?
Is a brushless motor worth the extra money on a cordless circular saw?
How many cuts can I get from a single battery charge?
What is bevel capacity and do I need more than 45 degrees?
Should I buy a left-blade or right-blade circular saw?
What does RPM mean on a cordless circular saw?
Do I need two batteries or is one enough?
How long does a circular saw blade last and when should I replace it?
Can I cut metal or PVC pipe with a cordless circular saw?
What is an electric brake and why does it matter on a circular saw?
Final Thoughts: The Verdict
If you want one dependable pick, the battery circular saw with battery winner is the DEWALT FLEXVOLT DCS578X2 because it brings 57 degrees of bevel, two 9.0Ah FLEXVOLT batteries, an electric brake, and an LED in one corded-power cordless kit. If you want the longest per-charge run on a single battery, grab the DEWALT DCS590WW1 with its 8 Ah POWERPACK and 368-cut rating. And for truck-honest power on a two-battery platform — with up to 558 crosscuts per charge in 2×4 SPF lumber — the Makita XSR01PT is the one to reach for.
Worth flagging: if you’re simply doing a few fence boards or shelving on the weekend, you don’t need a two-battery rear-handle saw. The DEKOPRO DKCS20Q1Y-G with its two 4.0Ah batteries, or the Dong Cheng 7-1/4-inch kit with its 800W brushless motor, will finish those jobs cleanly without the pickup-truck price tag. And if you already own Craftsman V20, WORX 20V, or SKIL PWR CORE 20 tools, staying in the battery family you already paid for is the smart financial move. Note that the DEWALT DCS578X2 carries the highest score here at 4.8 stars, though some of the single-battery kits carry a bigger pool of ratings — the quality still leads on score, and the higher score is what earns the top slot.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of September 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, KitchPrep earns from qualifying purchases. This does not affect which products we feature.
Related Guides
