A full bedspread is commonly sized around 96 x 110 inches in US bedding charts, designed to fit a 54 x 75 inch full/double mattress.
If you’re shopping for a full bedspread, you’ve likely noticed measurements vary. While 96 x 110 inches is the most common published size, other dimensions appear in legitimate US charts, and the right pick depends on your mattress depth and desired drop. Understanding this before ordering saves you the headache of returning a spread that’s too short or swallows the bed.
Standard Full Bedspread Dimensions in the US
The most frequently cited size is 96 x 110 inches, designed for a standard 54 x 75 inch full/double mattress. The extra fabric allows for the drop over the sides and foot, plus a bit of length to tuck around pillows. Fabric Resource and several other charts list these exact dimensions. The White Company’s US chart, however, gives 95 x 98 inches, while QL Textiles lists a practical range of 90 to 100 inches wide by 105 to 115 inches long. None is wrong; they reflect different design standards.
| Source or Standard | Full Bedspread Size |
|---|---|
| Fabric Resource chart | 96 x 110 inches |
| Bedding chart PDF | 96 x 110 inches |
| The White Company (US) | 95 x 98 inches |
| QL Textiles practical range | 90–100 x 105–115 inches |
The takeaway: if a listing says “full” without exact dimensions, assume 96 x 110 inches, but always check the specific measurements on the product page before buying.
How Full Bedspread Sizing Is Calculated
Manufacturers use a simple formula: the finished width is the mattress width plus two times the side drop; the finished length is the mattress length plus the foot drop, with extra allowance for pillows if covered. For a standard 54 x 75 inch mattress:
- Width: 54 inches + 2 × side drop
- Length: 75 inches + foot drop + pillow allowance
For floor-length coverage, a deeper drop is needed. A common guide recommends 15 to 21 inches for full/double bedspreads; deeper mattresses may require extra allowance.
How to Measure Your Bed for a Full Bedspread
To ensure a perfect fit, take three quick measurements before shopping:
- Measure the mattress width from side to side.
- Measure the mattress length from head to foot.
- Measure the desired drop from the top of the mattress to where you want the spread to end.
Total width equals mattress width plus twice the drop; total length equals mattress length plus foot drop, plus a few inches for tucking around pillows. If your bed sits high or the mattress is thick, add a couple more inches so the fabric doesn’t expose the box spring. A common mistake is assuming all “full” bedspreads are identical—cross-check the product listing’s dimensions against your own.
Full vs. Double and Other Sizing Notes
“Full” is used interchangeably with “double” in US mattress references, meaning the same 54 x 75 inch mattress. A queen-size spread will also lay over a full bed with a longer drop. These dimensions are specific to US charts; UK and other regional labels differ, so always check measurements in inches rather than the label. When ready to buy, comparing actual product measurements beats relying on the size name alone. Our tested roundup of full bedspread sets with verified dimensions helps you match a spread to your exact bed.
FAQs
Will a full bedspread fit a full XL mattress?
A full XL mattress measures 54 x 80 inches, 5 inches longer than a standard full. A standard 96 x 110 inch spread will generally cover it, since the extra length is absorbed by the foot drop. Deeper mattresses may need additional drop allowance.
What is the drop on a full bedspread?
The drop is the distance the spread hangs from the top of the mattress to its bottom edge. For full-sized beds, a recommended drop is 15 to 21 inches. The exact drop on a given spread depends on its total dimensions and mattress depth.
What’s the difference between a full bedspread and a comforter?
A bedspread is a single-layer cover that typically reaches the floor or near it, often covering pillows. A comforter is thicker and quilted, usually sitting higher on the bed and paired with a separate bed skirt for a longer drop.
References & Sources
- The White Company. “US Bedspreads Size Chart.” Lists the 95 x 98 inch full bedspread dimension.
- NCOA. “Mattress Sizes and Dimensions.” Confirms the 54 x 75 inch full/double mattress dimensions.
